{"title":"Products","description":"","products":[{"product_id":"t3d-024-000-two-arch-single-track-viaduct","title":"T3D-024-000 Two Arch Single Track Viaduct","description":"\u003cp\u003eA simple single track two arch viaduct products a print, approximately 248mm in length, 70mm in width and 88mm in height. The arches are 96mm at their widest point and approximately 74mm high. Viaduct module can be used standalone as small viaduct or printed multiple times for larger structures. The resulting structure is very robust and can easily self-support a single track. This is designed to be used with other Trackside 3D detailing products (walls, buttresses, etc).\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eApproximate Dimensions (can vary based on print settings): 248x70x88mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 23 hours 30 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA or Textured PLA (Brick \/ Cement)\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 113.08 m (~337g)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003cp\u003ePrint Considerations: This product is designed and optimized for 3D printing without needing support material. This speeds up printing time and reduces the amount of material used. The product should be printed upside down by rotating it 180 degrees in your 3D printing software, with support material turned off. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Large Object Profile\u003c\/li\u003e\n\u003cli\u003ePrint Upside down (flat side on bed, arches pointing up, like uu)\u003c\/li\u003e\n\u003cli\u003eSupport Material Disabled\u003c\/li\u003e\n\u003cli\u003eBuild Adhesion Brim - larger brim recommended\u003c\/li\u003e\n\u003cli\u003eInfill density \u0026gt;= 30% - higher value results in stronger viaduct\u003c\/li\u003e\n\u003cli\u003eLayer Height can be 0.15mm - 0.2mm\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":12886782738489,"sku":"T3D-024-000","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/024-000.jpg?v=1590146309"},{"product_id":"t3d-022-000-straight-platform-module-5cm-wide","title":"T3D-022-000 Straight Platform Module (5cm wide)","description":"\u003cp\u003eStraight platform produces a print approximately 260mm long, 50mm wide and 18.4mm high. The platform can be used with other modules to create more complex station platforms. \u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eApproximate Dimensions (can vary based on print settings): 260 x 50 x 18.4 mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 4 hours, 21 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 17.10 m (~ 51g)\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Medium Object Profile\u003c\/li\u003e\n\u003cli\u003eSupport Material - Disabled\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - brim\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer height - 0.2mm to 0.3mm\u003c\/li\u003e\n\u003cli\u003ePrint upside down (wider section against the bed)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePrint Considerations: This model is optimized for faster print times and less material usage by printing it upside down. The model should be rotated 180 degrees in your 3D printing software before printing. The model can be printed without rotating it but would require support material settings to be enable. We recommend printing upside down to improve print quality and reduce print failures.\u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13194974134329,"sku":"T3D-022-000","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/022-000.jpg?v=1590146300"},{"product_id":"t3d-008-000-railwayside-terrace-low-relief-house-rear-open-plan","title":"T3D-008-000 Railwayside Terrace - Low Relief House (Rear) Open Plan","description":"\u003cp\u003eThis 3D model produces the back of a low relief terraced house. The printed model can be used by itself or combined with our series of bases to create rows of terraced houses. This version of the model is open plan, with no interior walls apart from the interior dividing wall. This product is designed to be used with our Trackside 3D Mix n Match building details. The door, window and chimney stacks from out Building Accessories series (006) can be mixed and matched with this product to create a unique look. An optional rear wall for mounting and running wiring is also available.\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003eWindows:\u003c\/strong\u003e This product has three styles of window openings:\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e \u003cstrong\u003eWindow Size\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTrackside 3D Product\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e000 (12x16x1)\u003c\/td\u003e\n\u003ctd\u003e006-009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e001 (10x16x1)\u003c\/td\u003e\n\u003ctd\u003e006-010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e001 (8x16x1)\u003c\/td\u003e\n\u003ctd\u003e006-011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoors:\u003c\/strong\u003e This product uses Trackside 3D doors sized 000, products such as 006-007 will fit this product.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChimneys: \u003c\/strong\u003eThis product uses two types of chimneys. The central chimney stack uses size 004. The chimney on the left is wider than the one on the right to enable creating rows of houses. When connecting houses together, use chimney stacks size 003 which come with stack clips. The left hand chimney stack uses size 001 when it is the first house in a row. The right hand chimney stack uses size 002 when it is the last house in a row.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCreating rows of terraced houses: \u003c\/strong\u003eThis product is designed to be very flexible. When creating a row of houses, start from left to right. The houses can be used stand alone or with our bases. For easier installation, wiring for lights and to complete the look of the building, we offer a rear wall \/ rear mounting plate as 008-007. We have also have four bases available:\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eDescription\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e008-003\u003c\/td\u003e\n\u003ctd\u003eLeft (first house in row)\u003c\/td\u003e\n\u003ctd\u003eBase with walls, side and rear entrances\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e008-004\u003c\/td\u003e\n\u003ctd\u003eMiddle\u003c\/td\u003e\n\u003ctd\u003eBase with walls, rear entrances are offset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e008-005\u003c\/td\u003e\n\u003ctd\u003eMiddle\u003c\/td\u003e\n\u003ctd\u003eBase with walls, rear entrances are centered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e008-006\u003c\/td\u003e\n\u003ctd\u003eRight (last house in row)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eBase with walls, rear entrances\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eApproximate Dimensions (vary based on print settings): 51.2 x 128 x 108.5 mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 11 hours, 47 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 47.88m (~143g)\u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Large Object Profile\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports Enabled (adjust XY distance and Z distance as needed)\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion brim\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 60%\u003c\/li\u003e\n\u003cli\u003eLayer height - Between 0.15mm and 0.2mm\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePrint considerations:\u003c\/strong\u003e This product must be printed with support material, care must be taken when removing support material from around window and door openings to prevent damage. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinishing:\u003c\/strong\u003e This product can be painted or wrapped with texture sheets for the desired look and feel. \u003cbr\u003e\u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13208580587577,"sku":"T3D-008-000","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/008-000.jpg?v=1590146216"},{"product_id":"t3d-008-001-railwayside-terrace-low-relief-house-rear-open-w-hallways","title":"T3D-008-001 Railwayside Terrace - Low Relief House (Rear) Open w\/ Hallways","description":"\u003cp\u003eThis 3D model produces the back of a low relief terraced house. The printed model can be used by itself or combined with our series of bases to create rows of terraced houses. This version of the model is partially open plan with front rooms \/ hallways. This product is designed to be used with our Trackside 3D Mix n Match building details. The door, window and chimney stacks from out Building Accessories series (006) can be mixed and matched with this product to create a unique look. An optional rear wall for mounting and running wiring is also available.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWindows:\u003c\/strong\u003e This product has three styles of window openings:\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 22%;\"\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 44.9191%;\"\u003e \u003cstrong\u003eWindow Size\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 28.0809%;\"\u003e\u003cstrong\u003eTrackside 3D Product\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 22%;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"width: 44.9191%;\"\u003e000 (12x16x1)\u003c\/td\u003e\n\u003ctd style=\"width: 28.0809%;\"\u003e006-009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 22%;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"width: 44.9191%;\"\u003e001 (10x16x1)\u003c\/td\u003e\n\u003ctd style=\"width: 28.0809%;\"\u003e006-010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 22%;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 44.9191%;\"\u003e001 (8x16x1)\u003c\/td\u003e\n\u003ctd style=\"width: 28.0809%;\"\u003e006-011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoors:\u003c\/strong\u003e This product uses Trackside 3D doors sized 000, products such as 006-007 will fit this product.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChimneys: \u003c\/strong\u003eThis product uses two types of chimneys. The central chimney stack uses size 004. The chimney on the left is wider than the one on the right to enable creating rows of houses. When connecting houses together, use chimney stacks size 003 which come with stack clips. The left hand chimney stack uses size 001 when it is the first house in a row. The right hand chimney stack uses size 002 when it is the last house in a row.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCreating rows of terraced houses: \u003c\/strong\u003eThis product is designed to be very flexible. When creating a row of houses, start from left to right. The houses can be used stand alone or with our bases. For easier installation, wiring for lights and to complete the look of the building, we offer a rear wall \/ rear mounting plate as 008-007. We have also have four bases available:\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e008-003\u003c\/td\u003e\n\u003ctd\u003eLeft (first house in row)\u003c\/td\u003e\n\u003ctd\u003eBase with walls, side and rear entrances\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e008-004\u003c\/td\u003e\n\u003ctd\u003eMiddle\u003c\/td\u003e\n\u003ctd\u003eBase with walls, rear entrances are offset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e008-005\u003c\/td\u003e\n\u003ctd\u003eMiddle\u003c\/td\u003e\n\u003ctd\u003eBase with walls, rear entrances are centered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e008-006\u003c\/td\u003e\n\u003ctd\u003eRight (last house in row)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eBase with walls, rear entrances\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003eApproximate Dimensions (vary based on print settings): 51.2 x 128 x 108.5 mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 12 hours, 15 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 49.86m (~149g)\u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Large Object Profile\u003c\/li\u003e\n\u003cli\u003eSupports Enabled (Adjust XY distance and Z distance as needed)\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - brim\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 60%\u003c\/li\u003e\n\u003cli\u003eLayer height = Between 0.2 and 0.15mm or better\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePrint considerations:\u003c\/strong\u003e This product must be printed with support material, care must be taken when removing support material from around window and door openings to prevent damage. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinishing:\u003c\/strong\u003e This product can be painted or wrapped with texture sheets for the desired look and feel. \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13208652120121,"sku":"T3D-008-001","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/008-001-A.jpg?v=1590146226"},{"product_id":"t3d-008-002-railwayside-terrace-low-relief-house-rear-6-rooms","title":"T3D-008-002 Railwayside Terrace - Low Relief House (Rear) 6 rooms","description":"\u003cp\u003eThis 3D model produces the back of a low relief terraced house. The printed model can be used by itself or combined with our series of bases to create rows of terraced houses. This version of the model has six interior rooms on each side (12 in total). This product is designed to be used with our Trackside 3D Mix n Match building details. The door, window and chimney stacks from out Building Accessories series (006) can be mixed and matched with this product to create a unique look. An optional rear wall for mounting and running wiring is also available.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWindows:\u003c\/strong\u003e This product has three styles of window openings:\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 22%;\"\u003e\u003cstrong\u003eQuantity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 44.9191%;\"\u003e \u003cstrong\u003eWindow Size\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 28.0809%;\"\u003e\u003cstrong\u003eTrackside 3D Product\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 22%;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"width: 44.9191%;\"\u003e000 (12x16x1)\u003c\/td\u003e\n\u003ctd style=\"width: 28.0809%;\"\u003e006-009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 22%;\"\u003e4\u003c\/td\u003e\n\u003ctd style=\"width: 44.9191%;\"\u003e001 (10x16x1)\u003c\/td\u003e\n\u003ctd style=\"width: 28.0809%;\"\u003e006-010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 22%;\"\u003e2\u003c\/td\u003e\n\u003ctd style=\"width: 44.9191%;\"\u003e001 (8x16x1)\u003c\/td\u003e\n\u003ctd style=\"width: 28.0809%;\"\u003e006-011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoors:\u003c\/strong\u003e This product uses Trackside 3D doors sized 000, products such as 006-007 will fit this product.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChimneys: \u003c\/strong\u003eThis product uses two types of chimneys. The central chimney stack uses size 004. The chimney on the left is wider than the one on the right to enable creating rows of houses. When connecting houses together, use chimney stacks size 003 which come with stack clips. The left hand chimney stack uses size 001 when it is the first house in a row. The right hand chimney stack uses size 002 when it is the last house in a row.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCreating rows of terraced houses: \u003c\/strong\u003eThis product is designed to be very flexible. When creating a row of houses, start from left to right. The houses can be used stand alone or with our bases. For easier installation, wiring for lights and to complete the look of the building, we offer a rear wall \/ rear mounting plate as 008-007. We have also have four bases available:\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e008-003\u003c\/td\u003e\n\u003ctd\u003eLeft (first house in row)\u003c\/td\u003e\n\u003ctd\u003eBase with walls, side and rear entrances\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e008-004\u003c\/td\u003e\n\u003ctd\u003eMiddle\u003c\/td\u003e\n\u003ctd\u003eBase with walls, rear entrances are offset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e008-005\u003c\/td\u003e\n\u003ctd\u003eMiddle\u003c\/td\u003e\n\u003ctd\u003eBase with walls, rear entrances are centered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e008-006\u003c\/td\u003e\n\u003ctd\u003eRight (last house in row)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eBase with walls, rear entrances\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eApproximate Dimensions (vary based on print settings): 51.2 x 128 x 108.5 mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 13 hours, 08 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 51.77m (~154g)\u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Large Object Profile\u003c\/li\u003e\n\u003cli\u003eSupport Material Enabled (adjust XY distance and Z distance as needed)\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - brim\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 60%\u003c\/li\u003e\n\u003cli\u003eLayer height = 0.15mm - 0.2mm\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003ePrint considerations:\u003c\/strong\u003e This product must be printed with support material, care must be taken when removing support material from around window and door openings to prevent damage. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinishing:\u003c\/strong\u003e This product can be painted or wrapped with texture sheets for the desired look and feel. \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13208984027193,"sku":"T3D-008-002","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/008-002-A.jpg?v=1590146236"},{"product_id":"t3d-008-003-railwayside-terrace-low-relief-house-rear-base-left-end","title":"T3D-008-003 Railwayside Terrace - Low Relief House (Rear) Base Left-End","description":"\u003cp\u003eThis is the base for the first house in a row of low relief terrace houses (rear). It is designed to work with 008-000, 008-001 and 008-002. Railwayside Terrace houses are designed to be installed left to right. This base comes with three object files, one without any offset, one with the center wall offset at 1.25mm and one with the center wall offset at 2.5mm. This allows you to choose how you want the house to line up with the garden walls. This base features an entrance on the side wall (left) and a rear entrance. The entrances can be detailed with any of our gate door products in the Building Accessories Series (006), the gate doors for this product are size 001.\u003c\/p\u003e\n\u003cp\u003eThis base is designed to connect to a middle \/ center base (eg. 008-004 or 008-005). We recommend using blue tack or tacky wax to assemble the components after 3D printing before gluing them in place.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eApproximate Dimensions (vary depending on print settings): 88x132.5x32 mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 5 hours, 57 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 25.54m (~76g)\u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Medium Object Profile\u003c\/li\u003e\n\u003cli\u003eSupport Material - Enabled\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - brim\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer height - 0.2mm to 0.3mm\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePrint considerations: This product should be printed with support material enabled. A minimum of 30% in-fill is recommended and default PLA heated bed settings to prevent warping of the base. \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13213216604217,"sku":"T3D-008-003","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/008-003-C.jpg?v=1590146248"},{"product_id":"t3d-008-004-railwayside-terrace-low-relief-house-rear-base-middle-offset-gates","title":"T3D-008-004 Railwayside Terrace - Low Relief House (Rear) Base Middle - Offset Gates","description":"\u003cp\u003eThis is the base for the middle houses in a row of low relief terrace houses (rear). It is designed to work with 008-000, 008-001 and 008-002. Railwayside Terrace houses are designed to be installed left to right. This base features entrances on the rear wall that are slightly offset from each other. The entrances can be detailed with any of our gate door products in the Building Accessories Series (006), the gate doors for this product are size 001. This product can be combined with 008-005 to add some variety to a row of terraced houses.\u003c\/p\u003e\n\u003cp\u003eThis base is designed to connect to another middle \/ center base (eg. 008-004 or 008-005) or an end base (eg. 008-003 or 008-006). We recommend using blue tack or tacky wax to assemble the components after 3D printing before gluing them in place.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eApproximate Dimensions (vary depending on print settings): 88x129x32 mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 5 hours, 03 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 21.97m (~66g)\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Medium Object Profile\u003c\/li\u003e\n\u003cli\u003eSupport Material - Enabled\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - brim\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer height - 0.2mm to 0.3mm\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePrint considerations: This product should be printed with support material enabled. A minimum of 30% in-fill is recommended and default PLA heated bed settings to prevent warping of the base. \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13213388701753,"sku":"T3D-008-004","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/008-004.jpg?v=1590146256"},{"product_id":"t3d-008-005-railwayside-terrace-low-relief-house-rear-base-middle-central-gates","title":"T3D-008-005 Railwayside Terrace - Low Relief House (Rear) Base Middle - Central Gates","description":"\u003cp\u003eThis is the base for the middle houses in a row of low relief terrace houses (rear). It is designed to work with 008-000, 008-001 and 008-002. Railwayside Terrace houses are designed to be installed left to right. This base features entrances on the rear wall that are positioned centrally. The entrances can be detailed with any of our gate door products in the Building Accessories Series (006), the gate doors for this product are size 001.\u003c\/p\u003e\n\u003cp\u003eThis base is designed to connect to another middle \/ center base (eg. 008-004 or 008-005) or an end base (eg. 008-003 or 008-006). We recommend using blue tack or tacky wax to assemble the components after 3D printing before gluing them in place.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eApproximate Dimensions (vary depending on print settings): 88x129x32 mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 5 hours, 01 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 21.97m (~66g)\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Medium Object Profile\u003c\/li\u003e\n\u003cli\u003eSupport Material - Enabled\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - brim\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer height - 0.2mm to 0.3mm\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePrint considerations: This product should be printed with support material enabled. A minimum of 30% in-fill is recommended and default PLA heated bed settings to prevent warping of the base. \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13213907320889,"sku":"T3D-008-005","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/008-005.jpg?v=1590146266"},{"product_id":"t3d-008-006-railwayside-terrace-low-relief-house-rear-base-right-end","title":"T3D-008-006 Railwayside Terrace - Low Relief House (Rear) Base Right-End","description":"\u003cp\u003eThis is the base for the last house in a row of low relief terrace houses (rear). It is designed to work with 008-000, 008-001 and 008-002. Railwayside Terrace houses are designed to be installed left to right. This base features two entrances on the rear wall. The entrances can be detailed with any of our gate door products in the Building Accessories Series (006), the gate doors for this product are size 001. This product also features a slight curb on the right hand side of the base.\u003c\/p\u003e\n\u003cp\u003eThis base is designed to connect to a middle \/ center base (eg. 008-004 or 008-005). We recommend using blue tack or tacky wax to assemble the components after 3D printing before gluing them in place.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eApproximate Dimensions (vary depending on print settings): 88x128x32 mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 5 hours, 01 minute\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 21.85m (~65g)\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Medium Object Profile\u003c\/li\u003e\n\u003cli\u003eSupport Material - Enabled\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - brim\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer height - 0.2mm to 0.3mm\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePrint considerations: This product should be printed with support material enabled. A minimum of 30% in-fill is recommended and default PLA heated bed settings to prevent warping of the base. \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13214468571193,"sku":"T3D-008-006","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/008-006.jpg?v=1590146275"},{"product_id":"t3d-008-007-railwayside-terrace-low-relief-house-rear-rear-wall-mounting-plate","title":"T3D-008-007 Railwayside Terrace - Low Relief House (Rear) Rear Wall \/ Mounting Plate","description":"\u003cp\u003eThis is the rear wall \/ mounting plate for any of our low relief house backs. It is designed to work with 008-000, 008-001 and 008-002. Railwayside Terrace houses are designed to be installed left to right. This product is designed to enclose the house while providing easy access to detail the interior. It can also be used as a mounting plate and fixed to the back scene. We recommend using blue tack to attach it to the back scene. The Railwayside Terrace houses have a unique design that allows the houses to slide and clip into the mounting plate, with sufficient play to account for differences between 3D printers and filament materials. When used with our base products, the plate makes it easier to install the houses in a row, even on a sloped baseboard. The plate closes gaps around the chimney and apex of the roof. There is a small gap along the center of the house when used with the base for routing wires and daisy chaining lighting between buildings.\u003c\/p\u003e\n\u003cp\u003eThis package comes with three STL files, we recommend using plate style C, but two additional plate styles (without the roof edging) and different thickness of guides are provided.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eApproximate Dimensions (vary depending on print settings): 127x100x3 mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 2 hours, 09 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 8.72m (~26g)\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Medium Object Profile\u003c\/li\u003e\n\u003cli\u003eSupport Material - Disabled\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - brim\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer height - 0.2mm to 0.3mm\u003c\/li\u003e\n\u003cli\u003ePrint Flat\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13215815663673,"sku":"T3D-008-007","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/008-007-A.jpg?v=1590146289"},{"product_id":"t3d-001-000-sleepers-flat-design-code-100-x-7","title":"T3D-001-000 Sleepers Flat Design, Code 100 x 7","description":"\u003cp\u003eThis 3D model produces a set of 7, full length code 100 sleepers. These are a flat design for use as scenery or to slide under standard code 100 track to replace missing or fill in gaps between sleepers. This product is designed for easy installation of sleepers under installed flex track, such as Peco or Hornby code 100 flexible track. It works well with Hatchbox3D Wood PLA.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003e\u003cem\u003eIndividual Sleeper Dimensions:\u003c\/em\u003e \u003cstrong\u003e30x3x1.75 mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrint Dimensions (varies depending on print settings):\u003c\/em\u003e \u003cstrong\u003e30x33x1.8 mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEstimated Print time (at 30mm\/sec):\u003c\/em\u003e \u003cstrong\u003e12 minutes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eRecommended Material:\u003c\/em\u003e \u003cstrong\u003ePLA \/ PETG\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMaterial Usage:\u003c\/em\u003e \u003cstrong\u003e0.7 m (~ 2g)\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003cp\u003e\u003cem\u003eMaterial:\u003c\/em\u003e \u003cstrong\u003ePLA, Magic PLA, Wood PLA or PETG\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrint Settings:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse\u003cstrong\u003e Trackside3D small object profile \u003c\/strong\u003efor your material\u003c\/li\u003e\n\u003cli\u003eSupport material should be\u003cstrong\u003e disabled\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion (\u003cstrong\u003eskirt or disabled \u003c\/strong\u003erecommended)\u003c\/li\u003e\n\u003cli\u003eRecommended in-fill range:\u003cb\u003e 30% - 100%\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003eLayer Height:\u003cb\u003e 0.2 to 0.3\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13220796170297,"sku":"T3D-001-000","price":1.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/001-000.jpg?v=1590145675"},{"product_id":"t3d-001-001-sleepers-short-flat-design-code-100-x-7","title":"T3D-001-001 Sleepers Short Flat Design, Code 100 x 7","description":"\u003cp\u003eThis 3D model produces a set of 7, shortened code 100 sleepers. The sleepers are designed to fit flex track that is installed near point-work or diamond crossings. The shortened sleeper is designed to fit the end of the flex track that is next to the junction. Full sized sleepers are too large and are impeded by the sleepers on the track branching away from the function. This product provides a solution to that problem. This product is designed for easy installation of sleepers under installed flex track, such as Peco or Hornby code 100 flexible track.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003e\u003cem\u003eIndividual Sleeper Dimensions:\u003c\/em\u003e \u003cstrong\u003e25x3x1.75 mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrint Dimensions (varies depending on print settings):\u003c\/em\u003e \u003cstrong\u003e25x33x1.8 mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEstimated Print time (at 30mm\/sec):\u003c\/em\u003e \u003cstrong\u003e10 minutes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eRecommended Material:\u003c\/em\u003e \u003cstrong\u003ePLA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMaterial Usage:\u003c\/em\u003e \u003cstrong\u003e0.6 m (~ 2g)\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eUse Trackside3D small object profile for your material\u003c\/li\u003e\n\u003cli\u003eSupports should be disabled\u003c\/li\u003e\n\u003cli\u003eBuild Plate Adhesion either skirt or disabled\u003c\/li\u003e\n\u003cli\u003eIn-fill density between 30% and 100%\u003c\/li\u003e\n\u003cli\u003eLayer Height of 0.15 - 0.2 mm\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13220895359033,"sku":"T3D-001-001","price":1.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/001-001.jpg?v=1590145684"},{"product_id":"t3d-002-000-oil-drum-larger-style-closed","title":"T3D-002-000 Oil Drum Larger Style - Closed","description":"\u003cp\u003eThis 3D model produces a standard single large (tall) oil drum. These drums were often seen throughout the railway network and can be used in depots, beside track, in sidings and a host of other locations. For best results we recommend printing at the highest possible resolution your 3D printer can handle, we typically use 0.1mm line height as the quality is improve, the print time and material usage over lower settings is negligible compared to the results.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003e\u003cem\u003ePrint Dimensions (vary depending on print settings):\u003c\/em\u003e \u003cstrong\u003e8x8x14mm\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEstimated Print time (at 30mm\/sec):\u003c\/em\u003e \u003cstrong\u003e13 minutes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMaterial Usage:\u003c\/em\u003e \u003cstrong\u003e0.2m (~1g)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003cp\u003e\u003cem\u003eRecommended Material:\u003c\/em\u003e \u003cstrong\u003ePLA\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports Disabled\u003c\/li\u003e\n\u003cli\u003eBuild Plate Adhesion Brim or Skirt\u003c\/li\u003e\n\u003cli\u003eIn-fill \u0026gt;= 40%\u003c\/li\u003e\n\u003cli\u003eLayer Height 0.1 or 0.12mm\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13235505791033,"sku":"T3D-002-000","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/002-000.jpg?v=1590145752"},{"product_id":"t3d-002-001-oil-drum-closed","title":"T3D-002-001 Oil Drum - Closed","description":"\u003cp\u003eThis 3D model produces a standard single large (tall) oil drum. These drums were often seen throughout the railway network and can be used in depots, beside track, in sidings and a host of other locations. For best results we recommend printing at the highest possible resolution your 3D printer can handle, we typically use 0.1mm line height as the quality is improve, the print time and material usage over lower settings is negligible compared to the results.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003e\u003cem\u003ePrint Dimensions (vary depending on print settings):\u003c\/em\u003e \u003cstrong\u003e8x8x11mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEstimated Print time (at 30mm\/sec):\u003c\/em\u003e \u003cstrong\u003e10 minutes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eRecommended Material:\u003c\/em\u003e \u003cstrong\u003ePLA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMaterial Usage:\u003c\/em\u003e \u003cstrong\u003e0.17m (~1g)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eNo Supports\u003c\/li\u003e\n\u003cli\u003eBuild Plate Adhesion Brim or Skirt\u003c\/li\u003e\n\u003cli\u003eInfill Density \u0026gt;= 40%\u003c\/li\u003e\n\u003cli\u003eLayer Height 0.1mm or 0.12mm\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13257925984313,"sku":"T3D-002-001","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/002-001.jpg?v=1590145762"},{"product_id":"t3d-003-001-point-machine-style-63-on-sleepers","title":"T3D-003-001 Point Machine - Style 63 on Sleepers","description":"\u003cp\u003eThis 3D model produces a Style 63 (WBS) point machine pre-mounted on sleepers. This model is designed to fit Peco and Hornby code 100 points. The model was developed from multiple technical drawings and design documents, along with dozens of photographs of installations to produce a replica of the Style 63 point machine in OO scale. This is a 'dummy' point machine for scenic purposes, it works well with Peco points and under the baseboard mounted point motors. \u003c\/p\u003e\n\u003cp\u003eThis model can be downloaded once with unlimited prints for personal use, making it good value for money and a great way to reduce costs on your layout.\u003c\/p\u003e\n\u003cp\u003eThis version is designed for \u003cem\u003e\u003cstrong\u003einstallation on the left hand side of left hand running track\u003c\/strong\u003e\u003c\/em\u003e. T3D-003-002 offers a reverse mounting option. T3D-003-003 provides the point machine unmounted.\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003eDesign Considerations: The bolt \/ bolt hole pattern is reduced by one slot on each of the four mounting points to improve print quality \/ success. We offer 003-007 which features this point motor with the exact bolt pattern but your success may vary depending on the resolution of your 3D printer. The cable entry (front), second drive cover (front) and crank cover (rear) are fractions of a mm over-scale in order to improve definition and match the look from photographs. \u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003ePrint Dimensions (varies based on print settings): 12x20.8x5.1mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 13 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.26m (~1g)\u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eSupport Material Enabled (adjust z-distance and xy-distance as needed)\u003c\/li\u003e\n\u003cli\u003eBuild Plate Adhesion skirt or disabled\u003c\/li\u003e\n\u003cli\u003eInfill Density should be 30%-40%\u003c\/li\u003e\n\u003cli\u003eLayer Height should be 0.1mm or better\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13258950508601,"sku":"T3D-003-001","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/003-001.jpg?v=1590145886"},{"product_id":"t3d-003-002-point-machine-style-63-on-sleepers-reversed","title":"T3D-003-002 Point Machine - Style 63 on Sleepers (Reversed)","description":"\u003cp\u003eThis 3D model produces a Style 63 (WBS) point machine pre-mounted on sleepers in a reverse position to T3D-003-001. This model is designed to fit Peco and Hornby code 100 points. The model was developed from multiple technical drawings and design documents, along with dozens of photographs of installations to produce a replica of the Style 63 point machine in OO scale. This is a 'dummy' point machine for scenic purposes, it works well with Peco points and under the baseboard mounted point motors. \u003c\/p\u003e\n\u003cp\u003eThis model can be downloaded once with unlimited prints for personal use, making it good value for money and a great way to reduce costs on your layout.\u003c\/p\u003e\n\u003cp\u003eThis version is designed for \u003cem\u003e\u003cstrong\u003einstallation on the right hand side of left hand running track\u003c\/strong\u003e\u003c\/em\u003e. T3D-003-001 offers a reverse mounting option. T3D-003-003 provides the point machine unmounted.\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003eDesign Considerations: The bolt \/ bolt hole pattern is reduced by one slot on each of the four mounting points to improve print quality \/ success. We offer 003-007 which features this point motor with the exact bolt pattern but your success may vary depending on the resolution of your 3D printer. The cable entry (front), second drive cover (front) and crank cover (rear) are fractions of a mm over-scale in order to improve definition and match the look from photographs. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003ePrint Dimensions (varies based on print settings): 12x20.8x5.1mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 13 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.26m (~1g)\u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eUse Trackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eSupport Material enabled (adjust Z and XY distance settings as needed)\u003c\/li\u003e\n\u003cli\u003eBuildplate Adhesion should be skirt or brim\u003c\/li\u003e\n\u003cli\u003eInfill should be between 30% and 40%\u003c\/li\u003e\n\u003cli\u003eLayer Height should be 0.1mm or better (lower number - higher res)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13259096653881,"sku":"T3D-003-002","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/003-002.jpg?v=1590145896"},{"product_id":"t3d-003-003-point-machine-style-63-machine-only-not-mounted","title":"T3D-003-003 Point Machine - Style 63 (machine only - not mounted)","description":"\u003cp\u003eThis 3D model produces a Style 63 (WBS) point machine. This model is designed to fit Peco and Hornby code 100 points. The model was developed from multiple technical drawings and design documents, along with dozens of photographs of installations to produce a replica of the Style 63 point machine in OO scale. This is a 'dummy' point machine for scenic purposes, it works well with Peco points and under the baseboard mounted point motors. \u003c\/p\u003e\n\u003cp\u003eThis model can be downloaded once with unlimited prints for personal use, making it good value for money and a great way to reduce costs on your layout.\u003c\/p\u003e\n\u003cp\u003eThis version is just the point machine, these point machines were typically mounted on sleepers that extended from the points. To complete the installation, you will need to construct a suitable set of sleeper mounts\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003eDesign Considerations: The bolt \/ bolt hole pattern is reduced by one slot on each of the four mounting points to improve print quality \/ success. We offer 003-007 which features this point motor with the exact bolt pattern but your success may vary depending on the resolution of your 3D printer. The cable entry (front), second drive cover (front) and crank cover (rear) are fractions of a mm over-scale in order to improve definition and match the look from photographs. \u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003ePrint Dimensions (varies based on print settings): 11x20.8x3.1mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 8 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.16m (\u0026lt; 1g)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eSupport Material optional\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - brim or skirt\u003c\/li\u003e\n\u003cli\u003eInfill density between 30% - 40% is recommended\u003c\/li\u003e\n\u003cli\u003eLayer Height 0.1mm or better\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13259163500601,"sku":"T3D-003-003","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/003-003.jpg?v=1590145906"},{"product_id":"t3d-003-004-point-machine-style-63a-on-sleepers","title":"T3D-003-004 Point Machine - Style 63A on Sleepers","description":"\u003cp\u003eThis 3D model produces a Style 63A (Siemens) point machine pre-mounted on sleepers. This model is designed to fit Peco and Hornby code 100 points. The model was developed from multiple technical drawings and design documents, along with dozens of photographs of installations to produce a replica of the Style 63A point machine in OO scale. This is a 'dummy' point machine for scenic purposes, it works well with Peco points and under the baseboard mounted point motors. \u003c\/p\u003e\n\u003cp\u003eThis model can be downloaded once with unlimited prints for personal use, making it good value for money and a great way to reduce costs on your layout.\u003c\/p\u003e\n\u003cp\u003eThis version is designed for \u003cem\u003e\u003cstrong\u003einstallation on the left hand side of left hand running track\u003c\/strong\u003e\u003c\/em\u003e. T3D-003-005 offers a reverse mounting option. T3D-003-006 provides the point machine unmounted.\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003eDesign Considerations: The bolt \/ bolt hole pattern is reduced by one slot on each of the four mounting points to improve print quality \/ success. \u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003ePrint Dimensions (varies based on print settings): 12x18.8x5.1mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 13 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.26m (~1g)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eUse Trackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eEnable Support Material (adjust Z and XY distance as needed)\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - optional, recommend brim\u003c\/li\u003e\n\u003cli\u003eInfill density should be between 30% and 40%\u003c\/li\u003e\n\u003cli\u003eLayer height should be best possible (0.1mm recommended)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13259539972153,"sku":"T3D-003-004","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/003-004.jpg?v=1590145916"},{"product_id":"t3d-003-005-point-machine-style-63a-on-sleepers-reversed","title":"T3D-003-005 Point Machine - Style 63A on Sleepers (Reversed)","description":"\u003cp\u003eThis 3D model produces a Style 63A (Siemens) point machine pre-mounted on sleepers in a reverse position to T3D-003-004. This model is designed to fit Peco and Hornby code 100 points. The model was developed from multiple technical drawings and design documents, along with dozens of photographs of installations to produce a replica of the Style 63A point machine in OO scale. This is a 'dummy' point machine for scenic purposes, it works well with Peco points and under the baseboard mounted point motors. \u003c\/p\u003e\n\u003cp\u003eThis model can be downloaded once with unlimited prints for personal use, making it good value for money and a great way to reduce costs on your layout.\u003c\/p\u003e\n\u003cp\u003eThis version is designed for \u003cem\u003e\u003cstrong\u003einstallation on the right hand side of left hand running track\u003c\/strong\u003e\u003c\/em\u003e. T3D-003-004 offers a reverse mounting option. T3D-003-006 provides the point machine unmounted.\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003eDesign Considerations: The bolt \/ bolt hole pattern is reduced by one slot on each of the four mounting points to improve print quality \/ success. \u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003ePrint Dimensions (varies based on print settings): 12x18.8x5.1mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 13 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.26m (~1g)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eUse Trackside3D small object profile\u003c\/li\u003e\n\u003cli\u003eEnable Support Material (adjust Z and XY distance options in Cura)\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion brim or skirt (optional)\u003c\/li\u003e\n\u003cli\u003eInfill Density should be between 30% and 40%\u003c\/li\u003e\n\u003cli\u003eLayer Height should be 0.1mm or better (lower)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13259703418937,"sku":"T3D-003-005","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/003-005.jpg?v=1590145927"},{"product_id":"t3d-003-006-point-machine-style-63a-machine-only-not-mounted","title":"T3D-003-006 Point Machine - Style 63A (machine only - not mounted)","description":"\u003cp\u003eThis 3D model produces a Style 63A (Siemens) point machine. This model is designed to fit Peco and Hornby code 100 points. The model was developed from multiple technical drawings and design documents, along with dozens of photographs of installations to produce a replica of the Style 63A point machine in OO scale. This is a 'dummy' point machine for scenic purposes, it works well with Peco points and under the baseboard mounted point motors. \u003c\/p\u003e\n\u003cp\u003eThis model can be downloaded once with unlimited prints for personal use, making it good value for money and a great way to reduce costs on your layout.\u003c\/p\u003e\n\u003cp\u003eThis version is just the point machine, these point machines were typically mounted on sleepers that extended from the points. To complete the installation, you will need to construct a suitable set of sleeper mounts.\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003eDesign Considerations: The bolt \/ bolt hole pattern is reduced by one slot on each of the four mounting points to improve print quality \/ success. \u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003ePrint Dimensions (varies based on print settings): 11x18.8x3.1mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 8 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.16m (\u0026lt; 1g)\u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eUse Trackside3D small object profile\u003c\/li\u003e\n\u003cli\u003eSupport Material optional (watch Z and XY distance if used)\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion brim or skirt\u003c\/li\u003e\n\u003cli\u003eInfill density should be between 30% and 40%\u003c\/li\u003e\n\u003cli\u003eLayer Height 0.1mm (or best available)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13260958990393,"sku":"T3D-003-006","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/003-006.jpg?v=1590145937"},{"product_id":"t3d-003-007-point-machine-style-63-on-sleepers-with-extra-detailing","title":"T3D-003-007 Point Machine - Style 63 on Sleepers with Extra Detailing","description":"\u003cp\u003eThis 3D model produces a Style 63 (WBS) point machine pre-mounted on sleepers. This model is designed to fit Peco and Hornby code 100 points. The model was developed from multiple technical drawings and design documents, along with dozens of photographs of installations to produce a replica of the Style 63 point machine in OO scale. This is a 'dummy' point machine for scenic purposes, it works well with Peco points and under the baseboard mounted point motors. \u003c\/p\u003e\n\u003cp\u003eThis model can be downloaded once with unlimited prints for personal use, making it good value for money and a great way to reduce costs on your layout.\u003c\/p\u003e\n\u003cp\u003eThis version is designed for \u003cem\u003e\u003cstrong\u003einstallation on the left hand side of left hand running track\u003c\/strong\u003e\u003c\/em\u003e. T3D-003-002 offers a reverse mounting option. T3D-003-003 provides the point machine unmounted.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003ePrint Dimensions (varies based on print settings): 12x20.8x5.1mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 13 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.26m (~1g)\u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003cp\u003ePrint Considerations: Support material should be enabled, print at the highest possible print layer resolution. We print these at 0.1mm with 30-40% infill. This design requires 0.1mm layer height resolution to print properly. You may need to experiment with the settings to get the bolt pattern to print correctly. This design is more detailed and more complex but is more accurate. Unless you are experienced with 3D printing and require the accurate bolt pattern, we recommend using 003-001 through 003-006 instead.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse Trackside3D small object profile\u003c\/li\u003e\n\u003cli\u003eEnable supports (tweak Z and XY distance as needed to remove supports)\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion optional - recommend brim\u003c\/li\u003e\n\u003cli\u003eInfill should be 30% to 40% (adjust depending on material used)\u003c\/li\u003e\n\u003cli\u003eLayer height should be best available (recommend 0.12mm - 0.1mm)\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13261443989561,"sku":"T3D-003-007","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/003-007.jpg?v=1590145946"},{"product_id":"t3d-006-000-chimney-pots-aa-000-2","title":"T3D-006-000 Chimney Pots - AA-000-2","description":"\u003cp\u003eTwo chimney pots mounted on a chimney stack base.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eStyle: AA (Simple Round Chimney Pot 10mm high, 6mm diameter)\u003c\/p\u003e\n\u003cp\u003eSize: 000 (8 mm wide base)\u003c\/p\u003e\n\u003cp\u003eBase: 16x8x2 mm\u003c\/p\u003e\n\u003cp\u003eNumber of Pots: 2\u003c\/p\u003e\n\u003cp\u003ePrinted Time (at 30mm\/sec): 15 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.23m (~ 1g)\u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eDisable Support Material\u003c\/li\u003e\n\u003cli\u003ePrint upright\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - optional\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer Height - 0.15mm or better\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13262304215097,"sku":"T3D-006-000","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/006-000.jpg?v=1590145955"},{"product_id":"t3d-006-001-chimney-pots-aa-000-3","title":"T3D-006-001 Chimney Pots - AA-000-3","description":"\u003cp\u003eThree chimney pots mounted on a chimney stack base.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eStyle: AA (Simple Round Chimney Pot 10mm high, 6mm diameter)\u003c\/p\u003e\n\u003cp\u003eSize: 000 (8 mm wide base)\u003c\/p\u003e\n\u003cp\u003eBase: 24x8x2 mm\u003c\/p\u003e\n\u003cp\u003eNumber of Pots: 3\u003c\/p\u003e\n\u003cp\u003ePrinted Time (at 30mm\/sec): 19 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.34m (~ 1g)\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eDisable Support Material\u003c\/li\u003e\n\u003cli\u003ePrint upright\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - optional\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer Height - 0.15mm or better\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13262415527993,"sku":"T3D-006-001","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/006-001.jpg?v=1590145965"},{"product_id":"t3d-006-002-chimney-pots-aa-001-2","title":"T3D-006-002 Chimney Pots - AA-001-2","description":"\u003cp\u003eTwo chimney pots mounted on a chimney stack base.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eStyle: AA (Simple Round Chimney Pot 10mm high, 6mm diameter)\u003c\/p\u003e\n\u003cp\u003eSize: 001 (10 mm wide base)\u003c\/p\u003e\n\u003cp\u003eBase: 18x10x2 mm\u003c\/p\u003e\n\u003cp\u003eNumber of Pots: 2\u003c\/p\u003e\n\u003cp\u003ePrinted Time (at 30mm\/sec): 17 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.27m (~ 1g)\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eDisable Support Material\u003c\/li\u003e\n\u003cli\u003ePrint upright\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - optional\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer Height - 0.15mm or better\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13262499217465,"sku":"T3D-006-002","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/006-002.jpg?v=1590145976"},{"product_id":"t3d-006-003-chimney-pots-aa-001-3","title":"T3D-006-003 Chimney Pots - AA-001-3","description":"\u003cp\u003eThree chimney pots mounted on a chimney stack base.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eStyle: AA (Simple Round Chimney Pot 10mm high, 6mm diameter)\u003c\/p\u003e\n\u003cp\u003eSize: 001 (10 mm wide base)\u003c\/p\u003e\n\u003cp\u003eBase: 27x10x2 mm\u003c\/p\u003e\n\u003cp\u003eNumber of Pots: 3\u003c\/p\u003e\n\u003cp\u003ePrinted Time (at 30mm\/sec): 22 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.40m (~ 1g)\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eDisable Support Material\u003c\/li\u003e\n\u003cli\u003ePrint upright\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - optional\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer Height - 0.15mm or better\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13262677508153,"sku":"T3D-006-003","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/006-003.jpg?v=1590145986"},{"product_id":"t3d-006-004-chimney-pots-aa-003-3","title":"T3D-006-004 Chimney Pots - AA-003-3","description":"\u003cp\u003eThree chimney pots mounted on a chimney stack base.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eStyle: AA (Simple Round Chimney Pot 10mm high, 6mm diameter)\u003c\/p\u003e\n\u003cp\u003eSize: 003 (7 mm wide base)\u003c\/p\u003e\n\u003cp\u003eBase: 25x7x2 mm\u003c\/p\u003e\n\u003cp\u003eNumber of Pots: 3\u003c\/p\u003e\n\u003cp\u003ePrinted Time (at 30mm\/sec): 18 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.28m (~ 1g)\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eDisable Support Material\u003c\/li\u003e\n\u003cli\u003ePrint upright\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - optional\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer Height - 0.15mm or better\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13264027779129,"sku":"T3D-006-004","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/006-004.jpg?v=1590145995"},{"product_id":"t3d-006-005-chimney-pots-ab-003-3","title":"T3D-006-005 Chimney Pots - AB-003-3","description":"\u003cp\u003eThree chimney pots mounted on a chimney stack base.\u003c\/p\u003e\n\u003cp\u003eThis chimney has one taller (9mm) outer pot and two smaller 8mm high pots.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eStyle: AB (Simple Round Chimney Pot 9mm and 8mm high, 5mm diameter)\u003c\/p\u003e\n\u003cp\u003eSize: 003 (7 mm wide base)\u003c\/p\u003e\n\u003cp\u003eBase: 25x7x2 mm\u003c\/p\u003e\n\u003cp\u003eNumber of Pots: 3\u003c\/p\u003e\n\u003cp\u003ePrinted Time (at 30mm\/sec): 15 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.24m (~ 1g)\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eDisable Support Material\u003c\/li\u003e\n\u003cli\u003ePrint upright\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - optional\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer Height - 0.15mm or better\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13264093216825,"sku":"T3D-006-005","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/006-005.jpg?v=1590146006"},{"product_id":"t3d-006-006-chimney-pots-ab-003-2-with-stack-clip","title":"T3D-006-006 Chimney Pots - AB-004-2 with Stack Clip","description":"\u003cp\u003eTwo chimney pots mounted on a chimney stack base.\u003c\/p\u003e\n\u003cp\u003eStack Clip for use with Railwayside Terrace Buildings is also included.\u003c\/p\u003e\n\u003cp\u003eThis chimney has one taller (9mm) outer pot and one smaller 8mm high pot.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eStyle: AB (Simple Round Chimney Pot 9mm and 8mm high, 5mm diameter)\u003c\/p\u003e\n\u003cp\u003eSize: 004 (12 mm wide base)\u003c\/p\u003e\n\u003cp\u003eBase: 15x12x2 mm\u003c\/p\u003e\n\u003cp\u003eNumber of Pots: 2\u003c\/p\u003e\n\u003cp\u003ePrinted Time (at 30mm\/sec): 15 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.21m (~ 1g)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eStack Clip: 14x8.75x4 mm\u003c\/p\u003e\n\u003cp\u003eClip Print Time (at 30mm\/sec): 7 minutes\u003c\/p\u003e\n\u003cp\u003eClip Material Usage:  0.15m (\u0026lt; 1g)\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eDisable Support Material\u003c\/li\u003e\n\u003cli\u003ePrint upright\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - optional\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer Height - 0.15mm or better\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13264148529209,"sku":"T3D-006-006","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/006-006.jpg?v=1590146017"},{"product_id":"t3d-006-012-chimney-pots-ab-004-3","title":"T3D-006-012 Chimney Pots - AB-004-3","description":"\u003cp\u003eThree chimney pots mounted on a chimney stack base.\u003c\/p\u003e\n\u003cp\u003eThis chimney has one taller (9mm) outer pot and one smaller 8mm high pot.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eStyle: AB (Simple Round Chimney Pot 9mm and 8mm high, 5mm diameter)\u003c\/p\u003e\n\u003cp\u003eSize: 004 (6 mm wide base)\u003c\/p\u003e\n\u003cp\u003eBase: 21x6x2 mm\u003c\/p\u003e\n\u003cp\u003eNumber of Pots: 3\u003c\/p\u003e\n\u003cp\u003ePrinted Time (at 30mm\/sec): 14 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.21m (~ 1g)\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eDisable Support Material\u003c\/li\u003e\n\u003cli\u003ePrint upright\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - optional\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer Height - 0.15mm or better\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13264267935801,"sku":"T3D-006-012","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/006-012.jpg?v=1590146075"},{"product_id":"t3d-006-013-chimney-pots-ac-004-3","title":"T3D-006-013 Chimney Pots - AC-004-3","description":"\u003cp\u003eThree chimney pots mounted on a chimney stack base.\u003c\/p\u003e\n\u003cp\u003eThis chimney has one taller (9mm) outer pot and one smaller 8mm high pot.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eStyle: AC (Simple Round Chimney Pot 9mm (center) and 8mm high (outer), 5mm diameter)\u003c\/p\u003e\n\u003cp\u003eSize: 004 (6 mm wide base)\u003c\/p\u003e\n\u003cp\u003eBase: 21x6x2 mm\u003c\/p\u003e\n\u003cp\u003eNumber of Pots: 3\u003c\/p\u003e\n\u003cp\u003ePrinted Time (at 30mm\/sec): 14 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.21m (~ 1g)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eDisable Support Material\u003c\/li\u003e\n\u003cli\u003ePrint upright\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - optional\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer Height - 0.15mm or better\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13264302506041,"sku":"T3D-006-013","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/006-013.jpg?v=1590146084"},{"product_id":"t3d-006-007-exterior-door-aa000","title":"T3D-006-007 Exterior Door AA000","description":"\u003cp\u003eExterior Door for Trackside 3D and other buildings\u003c\/p\u003e\n\u003cp\u003eStyle: AA (Wooden Door w\/ step and round door knob)\u003c\/p\u003e\n\u003cp\u003eSize: 000 (12x27.1x3 mm)\u003c\/p\u003e\n\u003cp\u003ePrint Dimensions (varies with print settings): 12x27.1x3 mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 11 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.25m (~ 1g)\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eDisable Support Material\u003c\/li\u003e\n\u003cli\u003ePrint upright\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - optional\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer Height - 0.15mm or better\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePrint Considerations: This model should be printed laying flat with the door knob facing up, no support material, build adhesion is optional but recommended for some printers.\u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13264482009145,"sku":"T3D-006-007","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/006-007.jpg?v=1590146027"},{"product_id":"t3d-006-008-exterior-door-aa001","title":"T3D-006-008 Exterior Door AA001","description":"\u003cp\u003eExterior Door for Trackside 3D and other buildings.\u003c\/p\u003e\n\u003cp\u003eThis door does not have a door knob but is detailed on both sides.\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003eNote: This exterior door size fits the Railwayside Terrace Bases, and is designed to fit with the step on the inside. It works well as a gate \/ garden door.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eStyle: AA (Wooden Door w\/ step and round door knob)\u003c\/p\u003e\n\u003cp\u003eSize: 001 (3.8x9x23.2 mm)\u003c\/p\u003e\n\u003cp\u003ePrint Dimensions (varies with print settings): 9x23.2x3.8 mm\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 22 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.17m (~ 1g)\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eDisable Support Material\u003c\/li\u003e\n\u003cli\u003ePrint upright\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - optional\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer Height - 0.15mm or better\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePrint Considerations: This model should be printed upright without support material but with build adhesion. This is due to detailing on both sides. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13264513957945,"sku":"T3D-006-008","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/006-008.jpg?v=1590146036"},{"product_id":"t3d-006-009-window-wb000","title":"T3D-006-009 Window WB000","description":"\u003cp\u003eWindow Frame, download once, unlimited prints for personal use.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eStyle: WB (Simple)\u003c\/p\u003e\n\u003cp\u003eSize: 000 (12x16x1 mm)\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 3 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.06m (~ \u0026lt; 1 g)\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eDisable Support Material\u003c\/li\u003e\n\u003cli\u003ePrint upright\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - optional\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer Height - 0.15mm or better\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13264963174457,"sku":"T3D-006-009","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/006-009.jpg?v=1590146046"},{"product_id":"t3d-006-010-window-wb001","title":"T3D-006-010 Window WB001","description":"\u003cp\u003eWindow Frame, download once, unlimited prints for personal use.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eStyle: WB (Simple)\u003c\/p\u003e\n\u003cp\u003eSize: 001 (10x16x1 mm)\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 3 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.05m (~ \u0026lt; 1 g)\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eDisable Support Material\u003c\/li\u003e\n\u003cli\u003ePrint upright\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - optional\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer Height - 0.15mm or better\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13264965337145,"sku":"T3D-006-010","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/006-010.jpg?v=1590146055"},{"product_id":"t3d-006-011-window-wb002","title":"T3D-006-011 Window WB002","description":"\u003cp\u003eWindow Frame, download once, unlimited prints for personal use.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eStyle: WB (Simple)\u003c\/p\u003e\n\u003cp\u003eSize: 002 (8x16x1 mm)\u003c\/p\u003e\n\u003cp\u003ePrint time (at 30mm\/sec): 3 minutes\u003c\/p\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: 0.05m (~ \u0026lt; 1 g)\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eDisable Support Material\u003c\/li\u003e\n\u003cli\u003ePrint upright\u003c\/li\u003e\n\u003cli\u003eBuild plate adhesion - optional\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer Height - 0.15mm or better\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13265197760569,"sku":"T3D-006-011","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/006-011.jpg?v=1590146065"},{"product_id":"t3d-007-000-cable-trunking-250mm-c1-10","title":"T3D-007-000 Cable Trunking 250mm C1.10","description":"\u003cp\u003eTrackside 3D's Cable Trunking System can be used to route wiring around your layout or used for scenic purposes. All of our trunking systems are scaled down versions of Network Rail RT\/E\/PS\/0013 standards to 1:76.2 scale. The 250mm sizing denotes the full-size prototype interior width of the trough. We recommend the 250mm and 350mm rated systems with 0.64 (22 AWG) wiring or smaller diameter wire when using the system to route wires. It works well for hiding wires to\/from the track, as well as signals, detectors and other electronics. Each of our trunking kits includes a scale lid, a single trough section (1m scaled down to OO scale), and a 10x trough section (this is equivalent to 10m of cable trough on the real full sized railway). We have additional products that provide cable routing holes in single trough sections and low-profile lids which allow for added wire capacity.\u003c\/p\u003e\n\u003cp\u003eC1.10 250mm Concrete Cable Trunking Kit includes object files to print:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle C1.10 Concrete Cable Trough\u003c\/li\u003e\n\u003cli\u003e10x section of C1.10 Concrete Cable Trough\u003c\/li\u003e\n\u003cli\u003eSingle C1.10 Concrete Cable Trough Lid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eType: C1.10 (250mm)\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eC1.10 Trunking:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle: 4.5mm x 13.1mm x 2.2mm\u003c\/li\u003e\n\u003cli\u003e10x Section: 4.5mm x 131.2mm x 2.2mm\u003c\/li\u003e\n\u003cli\u003eLid: 4.5mm x 13.1mm x 2.0mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRecommended Material: PLA or Cement Textured PLA\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e 3D Printed Component\u003c\/td\u003e\n\u003ctd\u003ePrint time (30mm\/sec)\u003c\/td\u003e\n\u003ctd\u003eMaterial Used\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.10 Trough\u003c\/td\u003e\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\u003ctd\u003e0.04m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.10 Lid\u003c\/td\u003e\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\u003ctd\u003e0.06m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC1.10 10m section\u003c\/td\u003e\n\u003ctd\u003e18 minutes\u003c\/td\u003e\n\u003ctd\u003e0.33m (~1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eSupports Disabled\u003c\/li\u003e\n\u003cli\u003eBuild Plate Adhesion - skirt, brim or none (recommend: skirt)\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 60% (recommend: 100%)\u003c\/li\u003e\n\u003cli\u003eLayer Height between 0.1mm and 0.12mm (or better)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13266817450041,"sku":"T3D-007-000","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/007-000-A.jpg?v=1590146098"},{"product_id":"t3d-007-001-cable-trunking-100mm-c1-6","title":"T3D-007-001 Cable Trunking 100mm C1.6","description":"\u003cp\u003eTrackside 3D's Cable Trunking System can be used to route wiring around your layout or used for scenic purposes. All of our trunking systems are scaled down versions of Network Rail RT\/E\/PS\/0013 standards to 1:76.2 scale. The 100mm sizing denotes the full-size prototype interior width of the trough. We recommend the 250mm and 350mm rated systems with 0.64 (22 AWG) wiring or smaller diameter wire when using the system to route wires. It works well for hiding wires to\/from the track, as well as signals, detectors and other electronics. Each of our trunking kits includes a scale lid, a single trough section (1m scaled down to OO scale), and a 10x trough section (this is equivalent to 10m of cable trough on the real full sized railway). We have additional products that provide cable routing holes in single trough sections and low-profile lids which allow for added wire capacity.\u003c\/p\u003e\n\u003cp\u003eC1.6 100mm Concrete Cable Trunking Kit includes object files to print:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle C1.6 Concrete Cable Trough\u003c\/li\u003e\n\u003cli\u003e10x section of C1.6 Concrete Cable Trough\u003c\/li\u003e\n\u003cli\u003eSingle C1.6 Concrete Cable Trough Lid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eType: C1.6 (100mm)\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eC1.6 Trunking:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle Base: 13.1mm x 2.5mm x 1.7mm\u003c\/li\u003e\n\u003cli\u003e10x Base: 131.2mm x 2.5mm x 1.7mm\u003c\/li\u003e\n\u003cli\u003eLid: 13.1mm x 2.5mm x 1.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRecommended Material: PLA or Cement Textured PLA\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e 3D Printed Component\u003c\/td\u003e\n\u003ctd\u003ePrint time (30mm\/sec)\u003c\/td\u003e\n\u003ctd\u003eMaterial Used\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.6 Trough\u003c\/td\u003e\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\u003ctd\u003e0.03m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.6 Lid\u003c\/td\u003e\n\u003ctd\u003e2 minutes\u003c\/td\u003e\n\u003ctd\u003e0.03m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC1.6 10m section\u003c\/td\u003e\n\u003ctd\u003e13 minutes\u003c\/td\u003e\n\u003ctd\u003e0.24m (~1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eSupports Disabled\u003c\/li\u003e\n\u003cli\u003eBuild Plate Adhesion - skirt, brim or none (recommend: skirt)\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 60% (recommend: 100%)\u003c\/li\u003e\n\u003cli\u003eLayer Height between 0.1mm and 0.12mm (or better)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13267006423097,"sku":"T3D-007-001","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/007-001-A.jpg?v=1590146113"},{"product_id":"t3d-007-002-cable-trunking-130mm-c1-7","title":"T3D-007-002 Cable Trunking 130mm C1.7","description":"\u003cp\u003eTrackside 3D's Cable Trunking System can be used to route wiring around your layout or used for scenic purposes. All of our trunking systems are scaled down versions of Network Rail RT\/E\/PS\/0013 standards to 1:76.2 scale. The 130mm sizing denotes the full-size prototype interior width of the trough. We recommend the 250mm and 350mm rated systems with 0.64 (22 AWG) wiring or smaller diameter wire when using the system to route wires. It works well for hiding wires to\/from the track, as well as signals, detectors and other electronics. Each of our trunking kits includes a scale lid, a single trough section (1m scaled down to OO scale), and a 10x trough section (this is equivalent to 10m of cable trough on the real full sized railway). We have additional products that provide cable routing holes in single trough sections and low-profile lids which allow for added wire capacity.\u003c\/p\u003e\n\u003cp\u003eC1.7 130mm Concrete Cable Trunking Kit includes object files to print:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle C1.7 Concrete Cable Trough\u003c\/li\u003e\n\u003cli\u003e10x section of C1.7 Concrete Cable Trough\u003c\/li\u003e\n\u003cli\u003eSingle C1.7 Concrete Cable Trough Lid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eType: C1.7 (130mm)\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eC1.7 Trunking:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle Base: 13.1mm x 2.9mm x 2.2mm\u003c\/li\u003e\n\u003cli\u003e10x Base: 131mm x 2.9mm x 2.2mm\u003c\/li\u003e\n\u003cli\u003eLid: 13.1mm x 2.9mm x 1.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRecommended Material: PLA or Cement Textured PLA\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e 3D Printed Component\u003c\/td\u003e\n\u003ctd\u003ePrint time (30mm\/sec)\u003c\/td\u003e\n\u003ctd\u003eMaterial Used\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.7 Trough\u003c\/td\u003e\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\u003ctd\u003e0.04m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.7 Lid\u003c\/td\u003e\n\u003ctd\u003e2 minutes\u003c\/td\u003e\n\u003ctd\u003e0.03m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC1.7 10m section\u003c\/td\u003e\n\u003ctd\u003e15 minutes\u003c\/td\u003e\n\u003ctd\u003e0.29m (~1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eSupports Disabled\u003c\/li\u003e\n\u003cli\u003eBuild Plate Adhesion - skirt, brim or none (recommend: skirt)\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 60% (recommend: 100%)\u003c\/li\u003e\n\u003cli\u003eLayer Height between 0.1mm and 0.12mm (or better)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13267496796217,"sku":"T3D-007-002","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/007-002-A.jpg?v=1590146125"},{"product_id":"t3d-007-003-cable-trunking-150mm-c1-8","title":"T3D-007-003 Cable Trunking 150mm C1.8","description":"\u003cp\u003eTrackside 3D's Cable Trunking System can be used to route wiring around your layout or used for scenic purposes. All of our trunking systems are scaled down versions of Network Rail RT\/E\/PS\/0013 standards to 1:76.2 scale. The 150mm sizing denotes the full-size prototype interior width of the trough. We recommend the 250mm and 350mm rated systems with 0.64 (22 AWG) wiring or smaller diameter wire when using the system to route wires. It works well for hiding wires to\/from the track, as well as signals, detectors and other electronics. Each of our trunking kits includes a scale lid, a single trough section (1m scaled down to OO scale), and a 10x trough section (this is equivalent to 10m of cable trough on the real full sized railway). We have additional products that provide cable routing holes in single trough sections and low-profile lids which allow for added wire capacity.\u003c\/p\u003e\n\u003cp\u003eC1.8 150mm Concrete Cable Trunking Kit includes object files to print:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle C1.8 Concrete Cable Trough\u003c\/li\u003e\n\u003cli\u003e10x section of C1.8 Concrete Cable Trough\u003c\/li\u003e\n\u003cli\u003eSingle C1.8 Concrete Cable Trough Lid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eType: C1.8 (150mm)\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eC1.8 Trunking:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle Base: 13.1mm x 3.3mm x 3.2mm\u003c\/li\u003e\n\u003cli\u003e10x Base: 131.2mm x 3.3mm x 3.2mm\u003c\/li\u003e\n\u003cli\u003eLid: 13.1mm x 3.3mm x 2.4mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRecommended Material: PLA or Cement textured PLA\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e 3D Printed Component\u003c\/td\u003e\n\u003ctd\u003ePrint time (30mm\/sec)\u003c\/td\u003e\n\u003ctd\u003eMaterial Used\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.8 Trough\u003c\/td\u003e\n\u003ctd\u003e4 minutes\u003c\/td\u003e\n\u003ctd\u003e0.05m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.8 Lid\u003c\/td\u003e\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\u003ctd\u003e0.05m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC1.8 10m section\u003c\/td\u003e\n\u003ctd\u003e19 minutes\u003c\/td\u003e\n\u003ctd\u003e0.38m (~1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eSupports Disabled\u003c\/li\u003e\n\u003cli\u003eBuild Plate Adhesion - skirt, brim or none (recommend: skirt)\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 60% (recommend: 100%)\u003c\/li\u003e\n\u003cli\u003eLayer Height between 0.1mm and 0.12mm (or better)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13267923173433,"sku":"T3D-007-003","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/007-003-A.jpg?v=1590146140"},{"product_id":"t3d-007-004-cable-trunking-190mm-c1-9","title":"T3D-007-004 Cable Trunking 190mm C1.9","description":"\u003cp\u003eTrackside 3D's Cable Trunking System can be used to route wiring around your layout or used for scenic purposes. All of our trunking systems are scaled down versions of Network Rail RT\/E\/PS\/0013 standards to 1:76.2 scale. The 190mm sizing denotes the full-size prototype interior width of the trough. We recommend the 250mm and 350mm rated systems with 0.64 (22 AWG) wiring or smaller diameter wire when using the system to route wires. It works well for hiding wires to\/from the track, as well as signals, detectors and other electronics. Each of our trunking kits includes a scale lid, a single trough section (1m scaled down to OO scale), and a 10x trough section (this is equivalent to 10m of cable trough on the real full sized railway). We have additional products that provide cable routing holes in single trough sections and low-profile lids which allow for added wire capacity.\u003c\/p\u003e\n\u003cp\u003eC1.9 190mm Concrete Cable Trunking Kit includes object files to print:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle C1.9 Concrete Cable Trough\u003c\/li\u003e\n\u003cli\u003e10x section of C1.9 Concrete Cable Trough\u003c\/li\u003e\n\u003cli\u003eSingle C1.9 Concrete Cable Trough Lid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eType: C1.9 (190mm)\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eC1.9 Trunking:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle Base: 13,1mm x 3.7mm x 2.2mm\u003c\/li\u003e\n\u003cli\u003e10x Base: 131.2mm x 3.7mm x 2.2mm\u003c\/li\u003e\n\u003cli\u003eLid: 13.1mm x 3.7mm x 1.6mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRecommended Material: PLA or Cement textured PLA\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e 3D Printed Component\u003c\/td\u003e\n\u003ctd\u003ePrint time (30mm\/sec)\u003c\/td\u003e\n\u003ctd\u003eMaterial Used\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.9 Trough\u003c\/td\u003e\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\u003ctd\u003e0.04m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.9 Lid\u003c\/td\u003e\n\u003ctd\u003e2 minutes\u003c\/td\u003e\n\u003ctd\u003e0.04m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC1.9 10m section\u003c\/td\u003e\n\u003ctd\u003e16 minutes\u003c\/td\u003e\n\u003ctd\u003e0.31m (~1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eSupports Disabled\u003c\/li\u003e\n\u003cli\u003eBuild Plate Adhesion - skirt, brim or none (recommend: skirt)\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 60% (recommend: 100%)\u003c\/li\u003e\n\u003cli\u003eLayer Height between 0.1mm and 0.12mm (or better)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13268118503481,"sku":"T3D-007-004","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/007-004-A.jpg?v=1590146151"},{"product_id":"t3d-007-005-cable-trunking-350mm-c1-29","title":"T3D-007-005 Cable Trunking 350mm C1.29","description":"\u003cp\u003eTrackside 3D's Cable Trunking System can be used to route wiring around your layout or used for scenic purposes. All of our trunking systems are scaled down versions of Network Rail RT\/E\/PS\/0013 standards to 1:76.2 scale. The 350mm sizing denotes the full-size prototype interior width of the trough. We recommend the 250mm and 350mm rated systems with 0.64 (22 AWG) wiring or smaller diameter wire when using the system to route wires. It works well for hiding wires to\/from the track, as well as signals, detectors and other electronics. Each of our trunking kits includes a scale lid, a single trough section (1m scaled down to OO scale), and a 10x trough section (this is equivalent to 10m of cable trough on the real full sized railway). We have additional products that provide cable routing holes in single trough sections and low-profile lids which allow for added wire capacity.\u003c\/p\u003e\n\u003cp\u003eC1.29 350mm Concrete Cable Trunking Kit includes object files to print:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle C1.29 Concrete Cable Trough\u003c\/li\u003e\n\u003cli\u003e10x section of C1.29 Concrete Cable Trough\u003c\/li\u003e\n\u003cli\u003eSingle C1.29 Concrete Cable Trough Lid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eType: C1.29 (350mm)\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eC1.29 Trunking:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle Base: 13.1mm x 5.8mm x 2.2mm\u003c\/li\u003e\n\u003cli\u003e10x Base: 131.2mm x 5.8mm x 2.2mm\u003c\/li\u003e\n\u003cli\u003eLid: 13.1mm x 5.8mm x 1.8mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRecommended Material: PLA or Cement textured PLA\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e 3D Printed Component\u003c\/td\u003e\n\u003ctd\u003ePrint time (30mm\/sec)\u003c\/td\u003e\n\u003ctd\u003eMaterial Used\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.29 Trough\u003c\/td\u003e\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\u003ctd\u003e0.05m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.29 Lid\u003c\/td\u003e\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\u003ctd\u003e0.07m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC1.29 10m section\u003c\/td\u003e\n\u003ctd\u003e19 minutes\u003c\/td\u003e\n\u003ctd\u003e0.37m (~1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eSupports Disabled\u003c\/li\u003e\n\u003cli\u003eBuild Plate Adhesion - skirt, brim or none (recommend: skirt)\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 60% (recommend: 100%)\u003c\/li\u003e\n\u003cli\u003eLayer Height between 0.1mm and 0.12mm (or better)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13268242104377,"sku":"T3D-007-005","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/007-005-A.jpg?v=1590146164"},{"product_id":"t3d-007-006-cable-trunking-350mm-c1-43","title":"T3D-007-006 Cable Trunking 350mm C1.43","description":"\u003cp\u003eTrackside 3D's Cable Trunking System can be used to route wiring around your layout or used for scenic purposes. All of our trunking systems are scaled down versions of Network Rail RT\/E\/PS\/0013 standards to 1:76.2 scale. The 350mm sizing denotes the full-size prototype interior width of the trough. We recommend the 250mm and 350mm rated systems with 0.64 (22 AWG) wiring or smaller diameter wire when using the system to route wires. It works well for hiding wires to\/from the track, as well as signals, detectors and other electronics. Each of our trunking kits includes a scale lid, a single trough section (1m scaled down to OO scale), and a 10x trough section (this is equivalent to 10m of cable trough on the real full sized railway). We have additional products that provide cable routing holes in single trough sections and low-profile lids which allow for added wire capacity.\u003c\/p\u003e\n\u003cp\u003eNote: The image of the lid shows the inside of the lid, the outside side is flat.\u003c\/p\u003e\n\u003cp\u003eC1.43 350mm Concrete Cable Trunking Kit includes object files to print:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle C1.43 Concrete Cable Trough\u003c\/li\u003e\n\u003cli\u003e10x section of C1.43 Concrete Cable Trough\u003c\/li\u003e\n\u003cli\u003eSingle C1.43 Concrete Cable Trough Lid\u003c\/li\u003e\n\u003cli\u003eSingle C1.43 Concrete Cable Trough Lid (fraction of a mm wider inside)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eType: C1.43 (350mm)\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eC1.43 Trunking:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle Base: 13.1mm x 5.8mm x 4.5mm\u003c\/li\u003e\n\u003cli\u003e10x Base: 131.2mm x 5.8mm x 4.5mm\u003c\/li\u003e\n\u003cli\u003eLid: 13.1mm x 5.8mm x 2.5mm\u003c\/li\u003e\n\u003cli\u003eWide Lid: 13.1mm x ~5.84mm x 2.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRecommended Material: PLA or Cement textured PLA\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e 3D Printed Component\u003c\/td\u003e\n\u003ctd\u003ePrint time (30mm\/sec)\u003c\/td\u003e\n\u003ctd\u003eMaterial Used\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.43 Trough\u003c\/td\u003e\n\u003ctd\u003e6 minutes\u003c\/td\u003e\n\u003ctd\u003e0.06m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.43 Lid\u003c\/td\u003e\n\u003ctd\u003e4 minutes\u003c\/td\u003e\n\u003ctd\u003e0.08m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eC1.43 10m section\u003c\/td\u003e\n\u003ctd\u003e26 minutes\u003c\/td\u003e\n\u003ctd\u003e0.52m (~2g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eSupports Disabled\u003c\/li\u003e\n\u003cli\u003eBuild Plate Adhesion - skirt, brim or none (recommend: skirt)\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 60% (recommend: 100%)\u003c\/li\u003e\n\u003cli\u003eLayer Height between 0.1mm and 0.12mm (or better)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13268401029177,"sku":"T3D-007-006","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/007-006-A.jpg?v=1590146176"},{"product_id":"t3d-007-015-cable-trunking-350mm-c1-43-cable-path-kit","title":"T3D-007-015 Cable Trunking 350mm C1.43 Cable Path Kit","description":"\u003cp\u003eTrackside 3D's Cable Trunking System can be used to route wiring around your layout or used for scenic purposes. All of our trunking systems are scaled down versions of Network Rail RT\/E\/PS\/0013 standards to 1:76.2 scale. The 350mm sizing denotes the full-size prototype interior width of the trough. We recommend the 250mm and 350mm rated systems with 0.64 (22 AWG) wiring or smaller diameter wire when using the system to route wires. It works well for hiding wires to\/from the track, as well as signals, detectors and other electronics. Each of our trunking kits includes a scale lid, a single trough section (1m scaled down to OO scale), and a 10x trough section (this is equivalent to 10m of cable trough on the real full sized railway). We have additional products that provide cable routing holes in single trough sections and low-profile lids which allow for added wire capacity.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed to be used with C1.43 Cable Trunking Kit T3D-007-006, this kit provides low profile lids and single cable trough components with cable routing \/ cable path holes. These troughs are used to route cables to other equipment.\u003c\/p\u003e\n\u003cp\u003eC1.43 350mm Concrete Cable Trunking Cable Path Kit includes object files to print:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle C1.43 Concrete Cable Trough with large cable hole\u003c\/li\u003e\n\u003cli\u003eSingle C1.43 Concrete Cable Trough with large cable holes (both sides)\u003c\/li\u003e\n\u003cli\u003eSingle C1.43 Concrete Cable Trough with scale cable holes (both sides)\u003c\/li\u003e\n\u003cli\u003eSingle C1.43 Concrete Cable Trough Lid with cable paths\u003c\/li\u003e\n\u003cli\u003eSingle C1.43 Concrete Cable Trough Low Profile Lid with cable paths\u003c\/li\u003e\n\u003cli\u003eSingle C1.43 Concrete Cable Trough Low Profile Lid without cable paths\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eType: C1.43 (350mm)\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eC1.43 Trunking:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBase w\/ single large hole - 13.1mm x 5.8mm x 4.5mm\u003c\/li\u003e\n\u003cli\u003eBase w\/ two large holes - 13.1mm x 5.8mm x 4.5mm\u003c\/li\u003e\n\u003cli\u003eBase w\/ scale holes - 13.1mm x 5.8mm x 4.5mm\u003c\/li\u003e\n\u003cli\u003eLow profile Lid with cable paths - 13.1mm x 5.8mm x 1.5mm\u003c\/li\u003e\n\u003cli\u003eLow profile Lid without cable paths - 13.1mm x 5.8mm x 1.5mm\u003c\/li\u003e\n\u003cli\u003eLid with cable paths - 13.1mm x 5.8mm x 2.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRecommended Material: PLA or Cement textured PLA\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e 3D Printed Component\u003c\/td\u003e\n\u003ctd\u003ePrint time (30mm\/sec)\u003c\/td\u003e\n\u003ctd\u003eMaterial Used\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.43 Trough (Scale)\u003c\/td\u003e\n\u003ctd\u003e6 minutes\u003c\/td\u003e\n\u003ctd\u003e0.06m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.43 Trough (Large - 1)\u003c\/td\u003e\n\u003ctd\u003e6 minutes\u003c\/td\u003e\n\u003ctd\u003e0.06m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.43 Trough (Large - 2)\u003c\/td\u003e\n\u003ctd\u003e6 minutes\u003c\/td\u003e\n\u003ctd\u003e0.06m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.43 Lid w\/Cutouts\u003c\/td\u003e\n\u003ctd\u003e4 minutes\u003c\/td\u003e\n\u003ctd\u003e0.08m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.43 LId Low Profile w\/ Cutouts\u003c\/td\u003e\n\u003ctd\u003e4 minutes\u003c\/td\u003e\n\u003ctd\u003e0.06m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.43 Lid Low Profile no Cutouts\u003c\/td\u003e\n\u003ctd\u003e4 minutes\u003c\/td\u003e\n\u003ctd\u003e0.06m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eSupports Disabled\u003c\/li\u003e\n\u003cli\u003eBuild Plate Adhesion - skirt, brim or none (recommend: skirt)\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 60% (recommend: 100%)\u003c\/li\u003e\n\u003cli\u003eLayer Height between 0.1mm and 0.12mm (or better)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13268727529529,"sku":"T3D-007-015","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/007-015-A.jpg?v=1592628324"},{"product_id":"t3d-007-016-cable-trunking-150mm-c1-8-cable-path-kit","title":"T3D-007-016 Cable Trunking 150mm C1.8 Cable Path Kit","description":"\u003cp\u003eTrackside 3D's Cable Trunking System can be used to route wiring around your layout or used for scenic purposes. All of our trunking systems are scaled down versions of Network Rail RT\/E\/PS\/0013 standards to 1:76.2 scale. The 150mm sizing denotes the full-size prototype interior width of the trough. We recommend the 250mm and 350mm rated systems with 0.64 (22 AWG) wiring or smaller diameter wire when using the system to route wires. It works well for hiding wires to\/from the track, as well as signals, detectors and other electronics. Each of our trunking kits includes a scale lid, a single trough section (1m scaled down to OO scale), and a 10x trough section (this is equivalent to 10m of cable trough on the real full sized railway). We have additional products that provide cable routing holes in single trough sections and low-profile lids which allow for added wire capacity.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed to be used with C1.8 Cable Trunking Kit T3D-007-003, this kit provides low profile lids and single cable trough components with cable routing \/ cable path holes. These troughs are used to route cables to other equipment.\u003c\/p\u003e\n\u003cp\u003eC1.8 150mm Concrete Cable Trunking Cable Path Kit includes object files to print:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle C1.8 Concrete Cable Trough with large cable hole\u003c\/li\u003e\n\u003cli\u003eSingle C1.8 Concrete Cable Trough with large cable holes (both sides)\u003c\/li\u003e\n\u003cli\u003eSingle C1.8 Concrete Cable Trough with scale cable holes (both sides)\u003c\/li\u003e\n\u003cli\u003eSingle C1.8 Concrete Cable Trough Lid with cable paths\u003c\/li\u003e\n\u003cli\u003eSingle C1.8 Concrete Cable Trough Low Profile Lid without cable paths\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eType: C1.8 (150mm)\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003eC1.8 Trunking:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBase with single cable path - 13.1mm x 3.3mm x 3.2mm\u003c\/li\u003e\n\u003cli\u003eBase with two cable paths - 13.1m x 3.3mm x 3.2mm\u003c\/li\u003e\n\u003cli\u003eBase with scale cable paths - 13.1mm x 3.3mm x 3.2mm\u003c\/li\u003e\n\u003cli\u003eLid - 13.1mm x 3.3mm x 2.4mm\u003c\/li\u003e\n\u003cli\u003eLow Profile Lid - 13.1 x 3.3mm x 1.4mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRecommended Material: PLA or Cement textured PLA\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e 3D Printed Component\u003c\/td\u003e\n\u003ctd\u003ePrint time (30mm\/sec)\u003c\/td\u003e\n\u003ctd\u003eMaterial Used\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.8 Trough (Scale)\u003c\/td\u003e\n\u003ctd\u003e4 minutes\u003c\/td\u003e\n\u003ctd\u003e0.05m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.8 Trough (Large - 1)\u003c\/td\u003e\n\u003ctd\u003e4 minutes\u003c\/td\u003e\n\u003ctd\u003e0.05m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.8 Trough (Large - 2)\u003c\/td\u003e\n\u003ctd\u003e4 minutes\u003c\/td\u003e\n\u003ctd\u003e0.05m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.8 Lid w\/Cutouts\u003c\/td\u003e\n\u003ctd\u003e3 minutes\u003c\/td\u003e\n\u003ctd\u003e0.04m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle C1.8 Lid Low Profile\u003c\/td\u003e\n\u003ctd\u003e2 minutes\u003c\/td\u003e\n\u003ctd\u003e0.04m (\u0026lt;1g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eSupports Disabled\u003c\/li\u003e\n\u003cli\u003eBuild Plate Adhesion - skirt, brim or none (recommend: skirt)\u003c\/li\u003e\n\u003cli\u003eInfill \u0026gt;= 60% (recommend: 100%)\u003c\/li\u003e\n\u003cli\u003eLayer Height between 0.1mm and 0.12mm (or better)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":13272564105273,"sku":"T3D-007-016","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/007-016-A.jpg?v=1590146205"},{"product_id":"t3d-001-002-inclined-track-bed-support-short","title":"T3D-001-002 Inclined Track Bed Support - Short","description":"\u003cp\u003eThis 3D model produces a short inclined track bed, approximately 100mm long and 34mm wide. These are designed to be 3D printed upside down to eliminate the need for support material. The pegs are designed to be inserted into scenic material such as plaster, plaster-cloth, polystyrene, foam etc. They are designed to provide a flat and solid support to install track on uneven scenic surfaces such as cliffs, hills, mountains etc. At 40% in-fill the pegs are strong enough to be inserted into foam, polystyrene and other soft materials. Recommend using a small screw driver to pierce harder materials such as plaster. The track bed support is designed to be pushed into the material, the grade of the incline adjusted and then glued in place with PVA glue. There is a longer version of this product available as T3D-001-003.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6\u003eSpecifications \u003c\/h6\u003e\n\u003cp\u003e\u003cem\u003ePrint Dimensions (various on printer settings):\u003c\/em\u003e \u003cstrong\u003e100x34x23.4 mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEstimated Print Time (at 30mm\/sec):\u003c\/em\u003e \u003cstrong\u003e1 hour 51 minutes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eRecommended Material:\u003c\/em\u003e \u003cstrong\u003ePLA or PETG\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMaterial Usage:\u003c\/em\u003e \u003cstrong\u003e2.46m (~ 7g)\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small or Medium Sized Object Profile\u003c\/li\u003e\n\u003cli\u003eObject should be printed upside down (base against bed)\u003c\/li\u003e\n\u003cli\u003eSupports should be disabled\u003c\/li\u003e\n\u003cli\u003eBrim Build plate adhesion is recommended\u003c\/li\u003e\n\u003cli\u003eIn-fill density of at least 30%, recommend 60% or higher\u003c\/li\u003e\n\u003cli\u003eLayer height of 0.12 is recommended for pegs strength\u003c\/li\u003e\n\u003cli\u003ePeg strength is linked to in-fill density\u003c\/li\u003e\n\u003cli\u003eEnable retraction if you get stringing between pegs\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":14509691600953,"sku":"T3D-001-002","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/001-002.jpg?v=1590145695"},{"product_id":"t3d-001-003-inclined-track-bed-support-long","title":"T3D-001-003 Inclined Track Bed Support - Long","description":"\u003cp\u003eThis 3D model produces a long inclined track bed, approximately 260mm long and 34mm wide. These are designed to be 3D printed upside down to eliminate the need for support material. The pegs are designed to be inserted into scenic material such as plaster, plaster-cloth, polystyrene, foam etc. They are designed to provide a flat and solid support to install track on uneven scenic surfaces such as cliffs, hills, mountains etc. At 40% in-fill the pegs are strong enough to be inserted into foam, polystyrene and other soft materials. Recommend using a small screw driver to pierce harder materials such as plaster. The track bed support is designed to be pushed into the material, the grade of the incline adjusted and then glued in place with PVA glue. There is a shorter version of this product available as T3D-001-002.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003e\u003cem\u003ePrint Dimensions (various on printer settings):\u003c\/em\u003e \u003cstrong\u003e260x34x22.8 mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEstimated Print Time (at 30mm\/sec):\u003c\/em\u003e \u003cstrong\u003e4 hours 26 minutes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eRecommended Material:\u003c\/em\u003e \u003cstrong\u003ePLA or PETG\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMaterial Usage:\u003c\/em\u003e \u003cstrong\u003e5.99m (~ 18g)\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Medium or Large Object Profile\u003c\/li\u003e\n\u003cli\u003eObject should be printed with the base against the bed (pegs facing up)\u003c\/li\u003e\n\u003cli\u003eSupports should be disabled\u003c\/li\u003e\n\u003cli\u003eBrim build plate adhesion should be used\u003c\/li\u003e\n\u003cli\u003eIn-fill density of at least 40%, recommend 80%\u003c\/li\u003e\n\u003cli\u003eLayer Height should be 0.12mm\u003c\/li\u003e\n\u003cli\u003eRetraction should be enabled if you get stringing between pegs\u003c\/li\u003e\n\u003cli\u003eIncreasing in-fill density will increase peg strength\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":14510526627897,"sku":"T3D-001-003","price":1.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/001-003.jpg?v=1590145704"},{"product_id":"t3d-002-004-location-case-large-br-slanted-top","title":"T3D-002-004 Location Case - Large (BR - Slanted Top)","description":"\u003cp\u003eThis product contains five separate 3D model files. These can be used to create a large slanted top style British Rail location case that could be seen throughout the UK rail network from the 1960s onwards. This type of location case is the latched door type. The model files include:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLocation Case - Wide Concrete Base with Closed Doors\u003c\/li\u003e\n\u003cli\u003eLocation Case - Wide Concrete Base with Open Doors\u003c\/li\u003e\n\u003cli\u003eLocation Case - Narrow Concrete Base with Closed Doors\u003c\/li\u003e\n\u003cli\u003eLocation Case - Narrow Concrete Base with Open Doors\u003c\/li\u003e\n\u003cli\u003eLocation Case Doors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003cp\u003e\u003cspan\u003eThis model can be downloaded once with unlimited prints for personal use, making it good value for money and a great way to reduce costs on your layout.\u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003eDesign Considerations: There are many different types of location cases used throughout the UK and across different eras. This model was created from photographs and British Rail technical drawings. \u003c\/p\u003e\n\u003ch6\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h6\u003e\n\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003cp\u003ePrint Dimensions: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e20mm x 18mm x 2mm (doors)\u003c\/li\u003e\n\u003cli\u003e9.2mm x 19mm x 26mm (open - large base)\u003c\/li\u003e\n\u003cli\u003e10mm x 19mm x 26mm (closed - large base)\u003c\/li\u003e\n\u003cli\u003e9.2mm x 17.2mm x 26mm (open - narrow base)\u003c\/li\u003e\n\u003cli\u003e10mm x 17.2mm x 26mm (closed - narrow base)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePrint time (at 30mm\/sec):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8 minutes (doors)\u003c\/li\u003e\n\u003cli\u003e52 minutes (open - large base)\u003c\/li\u003e\n\u003cli\u003e54 minutes (closed - large base)\u003c\/li\u003e\n\u003cli\u003e50 minutes (open - narrow base)\u003c\/li\u003e\n\u003cli\u003e54 minutes (closed - narrow base)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1g (0.17m) - doors\u003c\/li\u003e\n\u003cli\u003e3g (0.88m) - open large base\u003c\/li\u003e\n\u003cli\u003e3g (1.01m) - closed large base\u003c\/li\u003e\n\u003cli\u003e3g (0.86m) - open narrow base\u003c\/li\u003e\n\u003cli\u003e3g (0.99m) - closed narrow base\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eNo Supports\u003c\/li\u003e\n\u003cli\u003eBuild plate with brim\u003c\/li\u003e\n\u003cli\u003eIn-fill \u0026gt;= 30%\u003c\/li\u003e\n\u003cli\u003eLayer Height (best resolution possible - recommend 0.1mm - 0.12mm)\u003c\/li\u003e\n\u003cli\u003ePrint flat with doors facing upwards (or door opening facing upwards)\u003c\/li\u003e\n\u003cli\u003ePrint doors flat with latch detail facings upwards\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":16256276856889,"sku":"T3D-002-004","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/002-003-narrow_01cf0aa3-2ccf-41b7-8689-6a101b683ac4.jpg?v=1590145788"},{"product_id":"t3d-002-005-location-case-equipment-1","title":"T3D-002-005 Location Case Equipment 1","description":"\u003cp\u003eThis product contains one set of three models that are designed to be used with the open location case \/ relay case products from Trackside 3D. Like our other products, these are designed to be mixed and matched for a unique look and feel.\u003c\/p\u003e\n\u003cp\u003eThe top equipment rack contains seven mounted relays and cable trunking. The middle equipment rack contains some signaling equipment, relays and cable trunking. The bottom equipment rack contains power equipment and a battery for backup.\u003c\/p\u003e\n\u003cp\u003eThis product is designed for use with T3D-002-004.\u003c\/p\u003e\n\u003cp\u003eThe equipment details are designed to slide directly into the open relay cases supplied with T3D-002-004. \u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003eDesign Considerations: This equipment is suitable for use in a location case next to signals or point machines. It could be used on branch lines or heritage lines as well.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003ePrint Dimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6.5mm x 14.5mm x 5mm (Equipment 0)\u003c\/li\u003e\n\u003cli\u003e8.2mm x 14.5mm x 7.5mm (Equipment 1)\u003c\/li\u003e\n\u003cli\u003e7.2mm x 14.5mm x 4.2mm (Equipment 2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEstimated Print time: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10 minutes (Equipment 0)\u003c\/li\u003e\n\u003cli\u003e16 minutes (Equipment 1)\u003c\/li\u003e\n\u003cli\u003e9 minutes (Equipment 2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1g \/ 0.2m (Equipment 0)\u003c\/li\u003e\n\u003cli\u003e1g \/ 0.23m (Equipment 1)\u003c\/li\u003e\n\u003cli\u003e1g \/ 0.19m (Equipment 2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cp\u003eTrackside3D Small Object Profile\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDisable Support Material\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuild plate adhesion is optional, use brim if enabled\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInfill Density between 30% and 50%\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLayer Height should be maximum resolution (0.12mm, 0.1mm or smaller)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":16256457080889,"sku":"T3D-002-005","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/002-005-0.jpg?v=1590145817"},{"product_id":"t3d-002-006-catchpits-with-bar-type-grate","title":"T3D-002-006 - Catchpits with bar type grate","description":"\u003cp\u003eThis product contains a set of three model files. These create a bar type grate that sits on top of the catchpit, a catchpit and a low profile catchpit. You can use either the normal catchpit or the low profile catchpit with the grate depending on the depth of your ballast and scenery.\u003c\/p\u003e\n\u003cp\u003eThis model is based off the older bar grate style catchpits which you can still see on the railway network today. If you are modeling present day railways you could also use the blue mesh style catchpits instead. \u003c\/p\u003e\n\u003cp\u003eThis bar type grate is a good option even for modern layouts as it enables you to run a wider range of stock covering a longer period of time without looking out of place.\u003c\/p\u003e\n\u003cmeta http-equiv=\"content-type\" content=\"text\/html; charset=utf-8\"\u003e\n\u003cp\u003eDesign Considerations: These catchpits were used extensively throughout the UK, particularly during British Rail eras. \u003c\/p\u003e\n\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003ch6\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h6\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003ePrint Dimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e9.7mm x 17mm x 0.8mm (grate)\u003c\/li\u003e\n\u003cli\u003e9.6mm x 16.7mm x 4mm (catchpit)\u003c\/li\u003e\n\u003cli\u003e9.6mm x 16.7mm x 2mm (low profile catchpit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEstimated Print time (at 30mm\/sec):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3 minutes (grate)\u003c\/li\u003e\n\u003cli\u003e9 minutes (catchpit)\u003c\/li\u003e\n\u003cli\u003e5 minutes (low profile catchpit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRecommended Material: PLA\u003c\/p\u003e\n\u003cp\u003eMaterial Usage: \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u0026lt; 1g \/ 0.07m (grate)\u003c\/li\u003e\n\u003cli\u003e1g \/ 0.21m (catchpit)\u003c\/li\u003e\n\u003cli\u003e\u0026lt; 1g \/ 0.12m (catchpit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch6\u003ePrint Settings:\u003c\/h6\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eNo Supports\u003c\/li\u003e\n\u003cli\u003eBuild Plate adhesion skirt or disabled\u003c\/li\u003e\n\u003cli\u003eInfill Density 30% or higher\u003c\/li\u003e\n\u003cli\u003eLayer Height 0.12mm or less \u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":16256502136889,"sku":"T3D-002-006","price":2.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/002-006-C.jpg?v=1590145830"},{"product_id":"t3d-002-011-lner-style-ballast-bin","title":"T3D-002-011 LNER Style Ballast Bin","description":"\u003cmeta content=\"text\/html; charset=utf-8\" http-equiv=\"content-type\"\u003e\n\u003cp\u003eThis 3D model produces an LNER style ballast or chip bin. These ballast bins were seen along the lineside throughout the rail network. For best results we recommend printing at the highest possible resolution your 3D printer can handle, we typically use 0.1mm line height as the quality is improve, the print time and material usage over lower settings is negligible compared to the results.\u003c\/p\u003e\n\u003ch6\u003eSpecifications\u003c\/h6\u003e\n\u003cp\u003e\u003cem\u003ePrint Dimensions (vary depending on print settings):\u003c\/em\u003e \u003cstrong\u003e24x18.7x10mm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrint time (at 30mm\/sec):\u003c\/em\u003e \u003cstrong\u003e27 minutes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eRecommended Material:\u003c\/em\u003e \u003cstrong\u003ePLA \/ Textured Concrete-Cement PLA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eMaterial Usage:\u003c\/em\u003e \u003cstrong\u003e0.70m (~2g)\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch6\u003ePrint Settings\u003c\/h6\u003e\n\u003col\u003e\n\u003cli\u003eTrackside3D Small Object Profile\u003c\/li\u003e\n\u003cli\u003eNo Support Material\u003c\/li\u003e\n\u003cli\u003eBuildplate Adhesion Brim or Skirt\u003c\/li\u003e\n\u003cli\u003eInfill Density 50% - 100% (recommend 100 for best results)\u003c\/li\u003e\n\u003cli\u003eLayer Height 0.12mm or 0.1mm or better\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Trackside 3D","offers":[{"title":"Default Title","offer_id":17902879309881,"sku":"T3D-002-011","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0028\/6149\/8425\/products\/002-011.jpg?v=1590145856"}],"url":"https:\/\/trackside3d.co.uk\/collections\/frontpage\/era_1948-1956-early-british-railways+type_sleeper.oembed","provider":"Trackside3D by oorail.co.uk","version":"1.0","type":"link"}