T3D-002-001 Oil Drum - Closed

Trackside 3D SKU: T3D-002-001

$1.99 USD

Available Now!

This 3D model produces a standard single large (tall) oil drum. These drums were often seen throughout the railway network and can be used in depots, beside track, in sidings and a host of other locations. For best results we recommend printing at the highest possible resolution your 3D printer can handle, we typically use 0.1mm line height as the quality is improve, the print time and material usage over lower settings is negligible compared to the results.


Print Dimensions (vary depending on print settings): 8x8x11mm

Estimated Print time (at 30mm/sec): 10 minutes

Recommended Material: PLA

Material Usage: 0.17m (~1g)


  1. Trackside3D Small Object Profile
  2. No Supports
  3. Build Plate Adhesion Brim or Skirt
  4. Infill Density >= 40%
  5. Layer Height 0.1mm or 0.12mm