T3D-032-000 Road Cones

Trackside 3D SKU: T3D-032-000

$1.25 USD

Available Now!

Two styles of road cones, one normal and one tall. The taller cones are similar to the ones often seen in Britain for road works, while the normal sized cone is similar to those you see for cornering off utility work or restricted parking.

The cones feature a rounded beveled base (as pictured). The cones can be printed in orange PLA or you can try reflective PLA for some extra effects. The 3D view (black) incorrectly shows a square (not rounded) base due to a limitation in Blender related to beveling and glTF exporting. The cones will print as shown in the image (blue).


  • Small Cone - 4mm x 4mm x 5.5mm
  • Large Cone - 5.4mm x 5.4mm x 10.1mm

Recommended Material: PLA, PETG or reflective PLA

Estimated Print Times:

  • Small Cone - 6 minutes
  • Large Cone - 8 minutes

Note: Printing multiple cones will add about 1 minute per additional cone to the print time. So two small cones will be about 7 minutes, three large cones about 10 minutes. This will vary based on your settings and how you space the cones on the bed.

Estimated Material Usage:

  • Small Cone  <= 1g / 0.19m
  • Large Cone  <= 1g / 0.22m
  1. Trackside3D Small Object Profile
  2. Support Material Disabled
  3. Build Plate adhesion - none
  4. Infill >= 30%
  5. Layer Height - 0.1mm (best available)


You can print multiple cones at once. When printing multiple cones at once, we recommend placing the cone in the center of the square in your slicer (as shown in the picture). We also recommend enabling retraction and adjusting the settings appropriately for your printer / material to avoid stringing.