T3D-020-002 Village House Floor Plan VH001

Trackside 3D SKU: T3D-020-002

$2.99 USD

Available Now!

This 3D model produces a set of floor plans for the two story small village house. There are two floor plans, one for the ground floor and one for the upstairs. The ground floor plan can be used with our mix and match building details such as interior stairs and other upcoming interior building detail kits. The ground floor features a hallway, with a kitchen area to the left and a large living room / dining room area to the right. There is a small room at the center of the floor which could be used as a bathroom or a utility room. The second floor plan features an open stairwell, three different sized bedrooms and a small bathroom. The smaller bedroom could be used as a bathroom and the smaller room used for a closet or some other purpose.

These floor plans are compatible with all VH series buildings and are designed to be used with T3D-020 series Village buildings, VH series exterior walls and VH series roofs. 

The model is designed to easily slide into the T3D-020-001 Village House building shell. The idea here is that you can easily decorate the rooms, then slide it back into the building and clip the exterior walls into place.

 

Approximate Dimensions (vary based on print settings): 99 x 48 x 28 (ground), 99 x 48 x 24 (upper)

Print time: 47 minutes (depending on printer)

Recommended Material: PLA

Material Usage: 6.3m (~19g)

  1. Trackside3D Large Object Profile
  2. Tree Supports Enabled (adjust XY distance and Z distance as needed)
  3. Build plate adhesion brim
  4. Infill >= 20%
  5. Layer height - Between 0.15mm and 0.2mm
  6. Print sideways

Print considerations: This product must be printed with support material, care must be taken when removing support material from around window and door openings to prevent damage. 

Finishing: This product can be painted or wrapped with texture sheets for the desired look and feel.