T3D-001-008 Steam Era British Railways Wheel Stop

Trackside 3D SKU: T3D-001-008

No reviews

$1.50 USD

Available Now!

 

This is a steam era British Railways wheel stop inspired from several photographs taken on February 27th 1965 at Crewe North MPD. These wheel stops were bolted to the ends of the rails at the end of inspection pits and other locations throughout the depot. 

The model featured here has the wheel stop attached to a segment of rail. You would print two wheel stops and attach them to the rails at the end of your inspection pit. They can be glued directly to the rail or to the baseboard. The triangular section and bolt pattern should be facing inward.

Dimensions: 14mm x 4.5mm x 8mm

Estimated Print Time: 8 minutes

Material Usage: < 1 gram (0.10 m)

Recommended Material: PLA or PETG

 

  1. Trackside3D Small Object Profile
  2. No supports
  3. Build plate adhesion using skirt only
  4. In-fill >= 40%
  5. Layer Height = 0.1mm - 0.12mm
  6. Print upright

 

Alternative Print options:

Most printers should not have any issues printing this model upright. If your printer has a problem printing this upright or there are quality issues with the print. Try printing at a slower speed. If that does not work, print the model flat with supports. Make sure the bolt pattern is facing upwards.