T3D-002-011 LNER Style Ballast Bin

Trackside 3D SKU: T3D-002-011

$3.99 USD

Available Now!

This 3D model produces an LNER style ballast or chip bin. These ballast bins were seen along the lineside throughout the rail network. For best results we recommend printing at the highest possible resolution your 3D printer can handle, we typically use 0.1mm line height as the quality is improve, the print time and material usage over lower settings is negligible compared to the results.

Print Dimensions (vary depending on print settings): 24x18.7x10mm

Print time (at 30mm/sec): 27 minutes

Recommended Material: PLA / Textured Concrete-Cement PLA

Material Usage: 0.70m (~2g)

  1. Trackside3D Small Object Profile
  2. No Support Material
  3. Buildplate Adhesion Brim or Skirt
  4. Infill Density 50% - 100% (recommend 100 for best results)
  5. Layer Height 0.12mm or 0.1mm or better