T3D-003-003 Point Machine - Style 63 (machine only - not mounted)

Trackside 3D SKU: T3D-003-003

$4.99 USD

Available Now!

This 3D model produces a Style 63 (WBS) point machine. This model is designed to fit Peco and Hornby code 100 points. The model was developed from multiple technical drawings and design documents, along with dozens of photographs of installations to produce a replica of the Style 63 point machine in OO scale. This is a 'dummy' point machine for scenic purposes, it works well with Peco points and under the baseboard mounted point motors. 

This model can be downloaded once with unlimited prints for personal use, making it good value for money and a great way to reduce costs on your layout.

This version is just the point machine, these point machines were typically mounted on sleepers that extended from the points. To complete the installation, you will need to construct a suitable set of sleeper mounts

Design Considerations: The bolt / bolt hole pattern is reduced by one slot on each of the four mounting points to improve print quality / success. We offer 003-007 which features this point motor with the exact bolt pattern but your success may vary depending on the resolution of your 3D printer. The cable entry (front), second drive cover (front) and crank cover (rear) are fractions of a mm over-scale in order to improve definition and match the look from photographs. 

Print Dimensions (varies based on print settings): 11x20.8x3.1mm

Print time (at 30mm/sec): 8 minutes

Recommended Material: PLA

Material Usage: 0.16m (< 1g)


  1. Trackside3D Small Object Profile
  2. Support Material optional
  3. Build plate adhesion - brim or skirt
  4. Infill density between 30% - 40% is recommended
  5. Layer Height 0.1mm or better