T3D-003-006 Point Machine - Style 63A (machine only - not mounted)

Trackside 3D SKU: T3D-003-006

$4.99 USD

Available Now!

This 3D model produces a Style 63A (Siemens) point machine. This model is designed to fit Peco and Hornby code 100 points. The model was developed from multiple technical drawings and design documents, along with dozens of photographs of installations to produce a replica of the Style 63A point machine in OO scale. This is a 'dummy' point machine for scenic purposes, it works well with Peco points and under the baseboard mounted point motors. 

This model can be downloaded once with unlimited prints for personal use, making it good value for money and a great way to reduce costs on your layout.

This version is just the point machine, these point machines were typically mounted on sleepers that extended from the points. To complete the installation, you will need to construct a suitable set of sleeper mounts.

Design Considerations: The bolt / bolt hole pattern is reduced by one slot on each of the four mounting points to improve print quality / success. 

Print Dimensions (varies based on print settings): 11x18.8x3.1mm

Print time (at 30mm/sec): 8 minutes

Recommended Material: PLA

Material Usage: 0.16m (< 1g)

  1. Use Trackside3D small object profile
  2. Support Material optional (watch Z and XY distance if used)
  3. Build plate adhesion brim or skirt
  4. Infill density should be between 30% and 40%
  5. Layer Height 0.1mm (or best available)