T3D-008-006 Railwayside Terrace - Low Relief House (Rear) Base Right-End

Trackside 3D SKU: T3D-008-006

$2.99 USD

Available Now!

This is the base for the last house in a row of low relief terrace houses (rear). It is designed to work with 008-000, 008-001 and 008-002. Railwayside Terrace houses are designed to be installed left to right. This base features two entrances on the rear wall. The entrances can be detailed with any of our gate door products in the Building Accessories Series (006), the gate doors for this product are size 001. This product also features a slight curb on the right hand side of the base.

This base is designed to connect to a middle / center base (eg. 008-004 or 008-005). We recommend using blue tack or tacky wax to assemble the components after 3D printing before gluing them in place.

Approximate Dimensions (vary depending on print settings): 88x128x32 mm

Print time (at 30mm/sec): 5 hours, 01 minute

Recommended Material: PLA

Material Usage: 21.85m (~65g)

  1. Trackside3D Medium Object Profile
  2. Support Material - Enabled
  3. Build plate adhesion - brim
  4. Infill >= 30%
  5. Layer height - 0.2mm to 0.3mm

Print considerations: This product should be printed with support material enabled. A minimum of 30% in-fill is recommended and default PLA heated bed settings to prevent warping of the base.