Straight platform produces a print approximately 260mm long, 50mm wide and 18.4mm high. The platform can be used with other modules to create more complex station platforms.
Approximate Dimensions (can vary based on print settings): 260 x 50 x 18.4 mm
Print time (at 30mm/sec): 4 hours, 21 minutes
Recommended Material: PLA
Material Usage: 17.10 m (~ 51g)
Trackside3D Medium Object Profile
Support Material - Disabled
Build plate adhesion - brim
Infill >= 30%
Layer height - 0.2mm to 0.3mm
Print upside down (wider section against the bed)
Print Considerations: This model is optimized for faster print times and less material usage by printing it upside down. The model should be rotated 180 degrees in your 3D printing software before printing. The model can be printed without rotating it but would require support material settings to be enable. We recommend printing upside down to improve print quality and reduce print failures.
Recommended for the T3D-022-000 Straight Platform Module (5cm wide)